About Taylor Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Taylor: Beltrami County Fire 155.6850 MHz, narrow FM, 114 DPL. County-level ems dispatch that covers Taylor: Beltrami County EMS 155.0400 MHz, narrow FM, 162.2 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Beltrami County Fire talkgroup 51567 (hex c96f).
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Taylor, start with the Hines site of Allied Radio Matrix for Emergency Response (ARMER), about 5 miles away. Its control channels: 852.875, 859.2375 MHz.
Data updated .
Beltrami County channels that also cover Taylor
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Beltrami County Fire | Beltrami County Fire – Paging | 155.6850 In 154.7550 | 114 DPL | FMN | WPYB806 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Towns Fire | Blackduck Fire | 154.1300 | 123.0 PL | FMN | WYK585 |
| Towns Fire | Kelliher Fire | 154.1300 | FMN | KLS693 | |
| Towns Fire | Kelliher Fire | 154.3250 | FMN | KLS693 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Beltrami County EMS | North Mem. Health Care – Air Care | 155.0400 | 162.2 PL | FMN | WQHU386 |
| Beltrami County EMS | Sanford Lifeflight Operations | 453.1625 In 458.1625 | 141.3 PL | FMN | WNGG480 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Beltrami County Hospital | North County Hospital | 155.3250 | 114.8 PL | FMN | KEC981 |
| Beltrami County Hospital | Indian Hospital Public Health Service-Red Lake | 155.3250 | 123.0 PL | FMN | KNCT744 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Beltrami County Fire | County Fire Main | 51567 | c96f | D |
| Beltrami County EMS | EMS 1 Dispatch | 51535 | c94f | D |
| Beltrami County EMS | EMS 2 Dispatch | 51536 | c950 | D |
| Beltrami County EMS | Dispatch Bemidji | 51537 | c951 | D |
| Beltrami County EMS | Dispatch Kelliher | 51538 | c952 | D |
| Beltrami County EMS | Dispatch Debs | 51539 | c953 | D |
| Beltrami County EMS | Dispatch Jelle | 51540 | c954 | D |
Nearest trunked radio sites
Distances are measured from the center of Taylor.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Taylor?
We do not have a fire dispatch channel listed specifically for Taylor. The county-level fire dispatch channels in the same county: Beltrami County Fire 155.6850 MHz, narrow FM, 114 DPL.
What frequency does EMS or the ambulance service use in Taylor?
We do not have a EMS dispatch channel listed specifically for Taylor. The county-level EMS dispatch channels in the same county: Beltrami County EMS 155.0400 MHz, narrow FM, 162.2 PL.
Do fire departments and EMS use a trunked radio system in Taylor?
Yes. The county-level systems that cover Taylor are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Taylor?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Taylor?
For Taylor, start with the Hines site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.875, 859.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.