Skip to content

Thomson Fire and EMS Frequencies

We do not have frequencies listed specifically for Thomson in Carlton County, Minnesota yet. Countywide channels for Carlton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Wrenshall (Allied Radio Matrix for Emergency Response (ARMER)), about 7 miles away.

About Thomson Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Thomson: Carlton County Fire 154.2500 MHz, narrow FM, 110.9 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Carlton County Fire talkgroup 37136 (hex 9110).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Thomson, start with the Wrenshall site of Allied Radio Matrix for Emergency Response (ARMER), about 7 miles away. Its control channels: 851.75, 852.775 MHz.

Data updated .

Carlton County channels that also cover Thomson

Fire Dispatch

Fire Dispatch frequencies for Carlton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Carlton County FireCounty Paging154.2500
In 153.9500
110.9 PLFMNKNEZ405

Hospitals & Medical

Hospitals & Medical frequencies for Carlton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Carlton County HospitalCommunity Memorial Hospital Cloquet155.3550110.9 PLFMWPLG358
Carlton County HospitalCarlton Mercy Hospital & Health Care Center155.3550118.8 PLFMKWX563

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Carlton County FireFire EMS Dispatch371369110D
Carlton County FireCarlton County Fire – Fire Ground371689130D
Carlton County FireCarlton County Fire – Fire Ground371709132D
Carlton County FireCloquet Area Fire District Administration371429116D
Carlton County EMSEssentia Ambulance Moose Lake3710590f1D
Carlton County HospitalCloquet Hosp37148911cD

Nearest trunked radio sites

Distances are measured from the center of Thomson.

Wrenshall · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 66 (hex 42) · NAC 40A · about 7 mi away
Control 851.75, 852.775
Voice 851.375, 852.1, 852.225, 852.725, 853.05, 853.125
Duluth Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 43 (hex 2B) · about 8 mi away
Control 851.9875, 852.4875, 856.4625
Voice 851.2875, 851.775, 852.175, 852.625, 853.0875, 853.5875, 853.8375, 853.8625, 857.4875
Duluth - UMD · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 70 (hex 46) · NAC 400 · about 15 mi away
Control 857.0875, 859.9625
Voice 855.9875, 856.2125, 856.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Thomson?

We do not have a fire dispatch channel listed specifically for Thomson. The county-level fire dispatch channels in the same county: Carlton County Fire 154.2500 MHz, narrow FM, 110.9 PL.

Do fire departments and EMS use a trunked radio system in Thomson?

Yes. The county-level systems that cover Thomson are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Thomson?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Thomson?

For Thomson, start with the Wrenshall site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.75, 852.775 MHz. Program a control channel first; the scanner finds the voice channels from it.