Skip to content

Chippewa County Fire and EMS Frequencies

Chippewa County in Minnesota has 2 countywide conventional frequencies and 7 countywide talkgroups in our database. Use the list of 21 cities and communities below for local fire departments and EMS agencies.

About Chippewa County Fire and EMS Frequencies

Quick answer: Fire dispatch for Chippewa County: Chippewa County Fire 154.2650 MHz, narrow FM, 110.9 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Chippewa County Fire talkgroup 29130 (hex 71ca).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Chippewa County, start with the Granite Falls site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 853.575, 853.825 MHz.

Data updated .

Chippewa County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Chippewa County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chippewa County FireCounty Pagers X154.2650
In 158.9550
110.9 PLFMNWPTQ612

Hospitals & Medical

Hospitals & Medical frequencies for Chippewa County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chippewa County HospitalChippewa County Montevideo Hospital155.4000110.9 PLFMNKMK251

Chippewa County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Chippewa County FireChippewa County Fire – Dispatch2913071caD
Chippewa County FireChippewa County Fire – Paging – 154.2650 VHF2915071deD
Chippewa County FireChippewa County Fire – Tactical Channel2913171cbD
Chippewa County FireFire T2T2913271ccD
Chippewa County EMSChippewa County EMS – Dispatch2917171f3D
Chippewa County EMSCounty Health2917271f4D
Chippewa County HospitalMontevideo Hospital2917071f2D

Radio system sites in Chippewa County

Program the control channel first; your scanner finds the voice channels from it.

Granite Falls · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 80 (hex 50)
Control 853.575, 853.825
Voice 851.1875, 851.55, 851.7625
Montevideo · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 81 (hex 51) · NAC 402
Control 853.3375, 853.725
Voice 851.1625, 851.5875, 852.2125
Granite Falls · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 97 (hex 61)
Control 852.975, 856.2625
Voice 851.45, 857.2625, 858.2375
Milan · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 98 (hex 62) · NAC 40a
Control 853.5, 859.2625
Voice 851.95, 852.4875, 852.9
Clara City · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 99 (hex 63)
Control 851.8875, 855.4875
Voice 853.1, 853.375, 854.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Chippewa County

Common questions

What frequency does the fire department use in Chippewa County?

Fire dispatch channels listed for Chippewa County: Chippewa County Fire 154.2650 MHz, narrow FM, 110.9 PL.

Do fire departments and EMS use a trunked radio system in Chippewa County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Chippewa County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Chippewa County?

For Chippewa County, start with the Granite Falls site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 853.575, 853.825 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Chippewa County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Chippewa County are marked encrypted.

Are Chippewa County fire and EMS talkgroups encrypted?

None of the 7 talkgroups listed for Chippewa County are marked encrypted.