Skip to content

Dakota County Fire and EMS Frequencies

Dakota County in Minnesota has 4 countywide conventional frequencies and 14 countywide talkgroups in our database. Use the list of 30 cities and communities below for local fire departments and EMS agencies.

About Dakota County Fire and EMS Frequencies

Quick answer: Fire dispatch for Dakota County: Dakota County Fire 151.2950 MHz, narrow FM, CSQ. EMS dispatch for Dakota County: Dakota County EMS 155.4000 MHz, narrow FM, 79.7 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Dakota County Fire talkgroup 4200 (hex 1068).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Dakota County, start with the Dakota Co Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 851.1625, 853.0625, 853.3125 MHz.

Data updated .

Dakota County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Dakota County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dakota County FireEast Main151.2950CSQFMNWQHY521
Dakota County FireFire Paging154.7850CSQFMNWQHY522
Dakota County FireWest Main155.4150CSQFMNWQNJ632

EMS Dispatch

EMS Dispatch frequencies for Dakota County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dakota County EMSNorth Memorial Air Care 1 Dispatch155.400079.7 PLFMNWCV270

Dakota County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Dakota County FireEast Main42001068D
Dakota County FireWest Main4202106aD
Dakota County FireFire Statewide Roaming426210a6D
Dakota County FireFire Paging427210b0D
Dakota County FireFire All Call479812beD
Dakota County FireDakota Fireground4204106cD
Dakota County FireDakota Fireground4206106eD
Dakota County FireDakota Fireground42081070D
Dakota County FireDakota Fireground42101072D
Dakota County FireDakota Fireground42121074D
Dakota County FireHampton – Randolph Fire Operations42241080D
Dakota County FireSouth Metro SSP – WSP Fire Operations4236108cD
Dakota County FireHampton – Randolph Fire Operations42481098D
Dakota County FireSouth Metro Fire Operations (SSP/WSP)426010a4D

Radio system sites in Dakota County

Program the control channel first; your scanner finds the voice channels from it.

Dakota Co Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 1 · Site 3 (hex 3) · NAC 403
Control 851.1625, 853.0625, 853.3125, 853.5625, 860.7375
Voice 851.4875, 851.8375, 852.1875, 852.5875, 852.9875, 853.3375, 853.4875, 853.5875, 853.8625, 859.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Dakota County

Common questions

What frequency does the fire department use in Dakota County?

Fire dispatch channels listed for Dakota County: Dakota County Fire 151.2950 MHz, narrow FM, CSQ.

What frequency does EMS or the ambulance service use in Dakota County?

EMS dispatch channels listed for Dakota County: Dakota County EMS 155.4000 MHz, narrow FM, 79.7 PL.

Do fire departments and EMS use a trunked radio system in Dakota County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 14 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Dakota County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Dakota County?

For Dakota County, start with the Dakota Co Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.1625, 853.0625, 853.3125, 853.5625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Dakota County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Dakota County are marked encrypted.

Are Dakota County fire and EMS talkgroups encrypted?

None of the 14 talkgroups listed for Dakota County are marked encrypted.