Skip to content

Bristol Fire and EMS Frequencies

We do not have frequencies listed specifically for Bristol in Fillmore County, Minnesota yet. Countywide channels for Fillmore County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Harmony (Allied Radio Matrix for Emergency Response (ARMER)), about 7 miles away.

About Bristol Fire and EMS Frequencies

Quick answer: Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Fillmore County Fire talkgroup 20822 (hex 5156).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Bristol, start with the Harmony site of Allied Radio Matrix for Emergency Response (ARMER), about 7 miles away. Its control channels: 851.9875, 852.325 MHz.

Data updated .

Fillmore County channels that also cover Bristol

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Fillmore County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fillmore County FireFillmore County Fire – Fire Ground154.2200110.9 PLFMNWZC677

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Fillmore County FireFire EMS Dispatch208225156D
Fillmore County FireFillmore County Fire – Tactical Channel (1)208505172D
Fillmore County FireFillmore County Fire – Tactical Channel (2)208515173D

Nearest trunked radio sites

Distances are measured from the center of Bristol.

Harmony · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 83 (hex 53) · about 7 mi away
Control 851.9875, 852.325
Voice 851.4375, 851.8, 852.9875
Wykoff · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 18 (hex 12) · about 11 mi away
Control 856.9375
Voice 857.7625, 858.2375, 858.7375, 859.7125
Amherst · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 2 (hex 2) · about 14 mi away
Control 851.4875, 858.9375
Voice 851.9375, 852.9375, 857.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Bristol?

Yes. The county-level systems that cover Bristol are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Bristol?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Bristol?

For Bristol, start with the Harmony site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.9875, 852.325 MHz. Program a control channel first; the scanner finds the voice channels from it.