Skip to content

Holt Fire and EMS Frequencies

We do not have frequencies listed specifically for Holt in Fillmore County, Minnesota yet. Countywide channels for Fillmore County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Amherst (Allied Radio Matrix for Emergency Response (ARMER)), about 3 miles away.

About Holt Fire and EMS Frequencies

Quick answer: Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Fillmore County Fire talkgroup 20822 (hex 5156).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Holt, start with the Amherst site of Allied Radio Matrix for Emergency Response (ARMER), about 3 miles away. Its control channels: 851.4875, 858.9375 MHz.

Data updated .

Fillmore County channels that also cover Holt

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Fillmore County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fillmore County FireFillmore County Fire – Fire Ground154.2200110.9 PLFMNWZC677

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Fillmore County FireFire EMS Dispatch208225156D
Fillmore County FireFillmore County Fire – Tactical Channel (1)208505172D
Fillmore County FireFillmore County Fire – Tactical Channel (2)208515173D

Nearest trunked radio sites

Distances are measured from the center of Holt.

Amherst · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 2 (hex 2) · about 3 mi away
Control 851.4875, 858.9375
Voice 851.9375, 852.9375, 857.2375
Harmony · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 83 (hex 53) · about 12 mi away
Control 851.9875, 852.325
Voice 851.4375, 851.8, 852.9875
Troy - Utica · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 15 (hex F) · NAC 405 · about 14 mi away
Control 855.4625
Voice 853.075, 856.4875, 856.7625, 858.2625, 859.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Holt?

Yes. The county-level systems that cover Holt are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Holt?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Holt?

For Holt, start with the Amherst site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.4875, 858.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.