Skip to content

Pelican Lake Fire and EMS Frequencies

We do not have frequencies listed specifically for Pelican Lake in Grant County, Minnesota yet. Countywide channels for Grant County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Ashby (Allied Radio Matrix for Emergency Response (ARMER)), about 3 miles away.

About Pelican Lake Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Pelican Lake: Grant County Fire 154.2500 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Grant County Fire talkgroup 27316 (hex 6ab4).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Pelican Lake, start with the Ashby site of Allied Radio Matrix for Emergency Response (ARMER), about 3 miles away. Its control channels: 851.4875, 851.725 MHz.

Data updated .

Grant County channels that also cover Pelican Lake

Fire Dispatch

Fire Dispatch frequencies for Grant County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grant County FirePaging X154.2500
In 155.9100
CSQFMNKNFY944

Hospitals & Medical

Hospitals & Medical frequencies for Grant County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grant County HospitalGrant Health / Medical Center155.355071.9 PLFMNKNEQ267

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Grant County FireGrant Co Fire Dispatch273166ab4D

Nearest trunked radio sites

Distances are measured from the center of Pelican Lake.

Ashby · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 83 (hex 53) · NAC 407 · about 3 mi away
Control 851.4875, 851.725
Voice 852.975, 853.3875, 853.7625, 856.7125
Battle Lake · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 90 (hex 5A) · NAC 40B · about 11 mi away
Control 852.45, 855.7125
Voice 851.15, 851.4, 854.9875, 856.9625
Fergus Falls · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 92 (hex 5C) · NAC 401 · about 15 mi away
Control 856.2625, 858.9875
Voice 851.375, 851.5875, 853.9125, 857.2625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Pelican Lake?

We do not have a fire dispatch channel listed specifically for Pelican Lake. The county-level fire dispatch channels in the same county: Grant County Fire 154.2500 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Pelican Lake?

Yes. The county-level systems that cover Pelican Lake are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Pelican Lake?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Pelican Lake?

For Pelican Lake, start with the Ashby site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.4875, 851.725 MHz. Program a control channel first; the scanner finds the voice channels from it.