Braham also extends into Kanabec County.
About Braham Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Braham: Isanti County Fire 154.3100 MHz, narrow FM, 192.8 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Braham Fire talkgroup 6034 (hex 1792).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup; Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Braham, start with the Rush City - Prison site of Allied Radio Matrix for Emergency Response (ARMER), about 10 miles away. Its control channels: 854.5375, 854.7375 MHz.
Data updated .
Braham trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Braham Fire | Braham Fire | 6034 | 1792 | D |
Isanti County channels that also cover Braham
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Isanti County Fire | Isanti County Fire – Dispatch | 154.3100 In 152.4500 | 192.8 PL | FMN | WPIH246 |
| Isanti County Fire | Dispatch Paging | 154.4300 | 206.5 PL | FMN | KEG605 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Isanti County Hospital | Cambridge Medical Center | 150.7750 | FMN | — | |
| Isanti County Hospital | Cambridge Medical Center | 458.0250 | FMN | — | |
| Isanti County Hospital | Cambridge Medical Center | 463.5750 In 468.5750 | 125 DPL | FMN | WQJT517 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Isanti County Fire | County Fire Dispatch | 6032 | 1790 | D |
Nearest trunked radio sites
Distances are measured from the center of Braham.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Braham?
We do not have a fire dispatch channel listed specifically for Braham. The county-level fire dispatch channels in the same county: Isanti County Fire 154.3100 MHz, narrow FM, 192.8 PL.
Do fire departments and EMS use a trunked radio system in Braham?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Braham?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Braham?
For Braham, start with the Rush City - Prison site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 854.5375, 854.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Braham fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Braham are marked encrypted.