Skip to content

Balsam Fire and EMS Frequencies

Balsam in Itasca County, Minnesota has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Itasca Co. Simulcast (Allied Radio Matrix for Emergency Response (ARMER)), about 14 miles away.

About Balsam Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Balsam: Itasca County Fire 154.2350 MHz, narrow FM, 141.3 PL. County-level ems dispatch that covers Balsam: Itasca County EMS 155.2800 MHz, narrow FM, no tone. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Balsam Fire talkgroup 38880 (hex 97e0).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup; Allied Radio Matrix for Emergency Response (ARMER): 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Balsam, start with the Itasca Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER), about 14 miles away. Its control channels: 852.6, 852.75 MHz.

Data updated .

Balsam trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Balsam FireBalsam FIRE DEPT Administration3888097e0D

Itasca County channels that also cover Balsam

Fire Dispatch

Fire Dispatch frequencies for Itasca County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Itasca County FireFire Depts. / EMS154.2350
In 158.9850
141.3 PLFMNWQAK394
Itasca County FireItasca Paging155.5575114.8 PLFMNWQJK745/6

EMS Dispatch

EMS Dispatch frequencies for Itasca County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Itasca County EMSMeds One Inc.155.2800FMNWNUF766

Hospitals & Medical

Hospitals & Medical frequencies for Itasca County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Itasca County HospitalBigfork Valley Hospital155.355082.5 PLFMNKWI865
Itasca County HospitalDeer River Health Care Center155.355079.7 PLFMNWPGH686
Itasca County HospitalGrand Itasca Clinic & Hospital155.355077.0 PLFMNKWM623

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Itasca County FireItasca County Fire – Dispatch3882097a4D
Itasca County FireItasca County Fire – Paging3882497a8D
Itasca County FireSearch & Rescue388029792D
Itasca County FireItasca County Fire – Fire Ground3882297a6D
Itasca County FireItasca County Fire – Fire Ground3882697aaD
Itasca County FireItasca County Fire – Tactical Channel389369818D
Itasca County FireBUCK LAKE FIRE DEPT Administration389129800D
Itasca County FireALL FIRE38942981eD
Itasca County EMSItasca County EMS – Tactical Channel3882897acD
Itasca County EMSItasca County EMS – Tactical Channel3883097aeD
Itasca County EMSItasca County EMS – Tactical Channel38938981aD
Itasca County EMSMEDS-1 Ambulance Administration389169804D
Itasca County EMSALL EMS389449820D
Itasca County HospitalGrand Itasca Hospital3886097ccD

Nearest trunked radio sites

Distances are measured from the center of Balsam.

Itasca Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 44 (hex 2C) · NAC 400 · about 14 mi away
Control 852.6, 852.75
Voice 851.4125, 852.1625, 852.9, 853.175, 853.35, 853.575
Sax · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 31 (hex 1F) · NAC 402 · about 37 mi away
Control 855.7125, 857.9875
Voice 851.9125, 858.4875, 858.9875
Hill City · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 13 (hex D) · NAC 409 · about 37 mi away
Control 856.2375, 857.9375
Voice 852.875, 857.4625, 859.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Balsam?

We do not have a fire dispatch channel listed specifically for Balsam. The county-level fire dispatch channels in the same county: Itasca County Fire 154.2350 MHz, narrow FM, 141.3 PL.

What frequency does EMS or the ambulance service use in Balsam?

We do not have a EMS dispatch channel listed specifically for Balsam. The county-level EMS dispatch channels in the same county: Itasca County EMS 155.2800 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Balsam?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Balsam?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Balsam?

For Balsam, start with the Itasca Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.6, 852.75 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Balsam fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Balsam are marked encrypted.