Skip to content

Bigfork Fire and EMS Frequencies

Bigfork in Itasca County, Minnesota has 0 conventional frequencies and 2 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Mizpah (Allied Radio Matrix for Emergency Response (ARMER)), about 26 miles away.

About Bigfork Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Bigfork: Itasca County Fire 154.2350 MHz, narrow FM, 141.3 PL. County-level ems dispatch that covers Bigfork: Itasca County EMS 155.2800 MHz, narrow FM, no tone. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Bigfork Fire talkgroup 38882 (hex 97e2).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups; Allied Radio Matrix for Emergency Response (ARMER): 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Bigfork, start with the Mizpah site of Allied Radio Matrix for Emergency Response (ARMER), about 26 miles away. Its control channels: 851.8125, 853.625 MHz.

Data updated .

Bigfork trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Bigfork FireBigfork FIRE DEPT Administration3888297e2D
Bigfork FireBigfork Ambulance Administration3891097feD

Itasca County channels that also cover Bigfork

Fire Dispatch

Fire Dispatch frequencies for Itasca County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Itasca County FireFire Depts. / EMS154.2350
In 158.9850
141.3 PLFMNWQAK394
Itasca County FireItasca Paging155.5575114.8 PLFMNWQJK745/6

EMS Dispatch

EMS Dispatch frequencies for Itasca County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Itasca County EMSMeds One Inc.155.2800FMNWNUF766

Hospitals & Medical

Hospitals & Medical frequencies for Itasca County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Itasca County HospitalBigfork Valley Hospital155.355082.5 PLFMNKWI865
Itasca County HospitalDeer River Health Care Center155.355079.7 PLFMNWPGH686
Itasca County HospitalGrand Itasca Clinic & Hospital155.355077.0 PLFMNKWM623

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Itasca County FireItasca County Fire – Dispatch3882097a4D
Itasca County FireItasca County Fire – Paging3882497a8D
Itasca County FireSearch & Rescue388029792D
Itasca County FireItasca County Fire – Fire Ground3882297a6D
Itasca County FireItasca County Fire – Fire Ground3882697aaD
Itasca County FireItasca County Fire – Tactical Channel389369818D
Itasca County FireBUCK LAKE FIRE DEPT Administration389129800D
Itasca County FireALL FIRE38942981eD
Itasca County EMSItasca County EMS – Tactical Channel3882897acD
Itasca County EMSItasca County EMS – Tactical Channel3883097aeD
Itasca County EMSItasca County EMS – Tactical Channel38938981aD
Itasca County EMSMEDS-1 Ambulance Administration389169804D
Itasca County EMSALL EMS389449820D
Itasca County HospitalGrand Itasca Hospital3886097ccD

Nearest trunked radio sites

Distances are measured from the center of Bigfork.

Mizpah · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 24 (hex 18) · NAC 405 · about 26 mi away
Control 851.8125, 853.625
Voice 851.1875, 852.4125, 853.45
Margie · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 28 (hex 1C) · about 27 mi away
Control 851.8875, 853.6625
Voice 852.7125, 853.1625, 854.3125
Boise Fort Lookout · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 29 (hex 1D) · NAC 403 · about 31 mi away
Control 853.4875, 854.2625
Voice 851.3375, 851.7875, 852.875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bigfork?

We do not have a fire dispatch channel listed specifically for Bigfork. The county-level fire dispatch channels in the same county: Itasca County Fire 154.2350 MHz, narrow FM, 141.3 PL.

What frequency does EMS or the ambulance service use in Bigfork?

We do not have a EMS dispatch channel listed specifically for Bigfork. The county-level EMS dispatch channels in the same county: Itasca County EMS 155.2800 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Bigfork?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Bigfork?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Bigfork?

For Bigfork, start with the Mizpah site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.8125, 853.625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Bigfork fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Bigfork are marked encrypted.