About Knife Lake Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Knife Lake: Kanabec County Fire 154.7400 MHz, narrow FM, 116 DPL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Kanabec County Fire talkgroup 6680 (hex 1a18).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Knife Lake, start with the Olgilvie site of Allied Radio Matrix for Emergency Response (ARMER), about 6 miles away. Its control channels: 853.075, 853.875 MHz.
Data updated .
Kanabec County channels that also cover Knife Lake
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kanabec County Fire | County Fire Paging | 154.7400 In 158.9550 | 116 DPL | FMN | KWL362 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kanabec County Fire | Kanabec County Fire – Fire Ground | 154.1750 | 192.8 PL | FM | KNDE604 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kanabec County Hospital | Kanabec County Hospital Operations – Mora | 150.9050 | FM | WPMM684 | |
| Kanabec County Hospital | Kanabec County Hospital EMS – Mora | 155.3850 | 110.9 PL | FM | KAX271 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Kanabec County Fire | Kanabec Law 6680 | 6680 | 1a18 | D |
| Kanabec County EMS | County EMS | 6670 | 1a0e | D |
| Kanabec County Hospital | Mora Hospital | 6682 | 1a1a | D |
Nearest trunked radio sites
Distances are measured from the center of Knife Lake.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Knife Lake?
We do not have a fire dispatch channel listed specifically for Knife Lake. The county-level fire dispatch channels in the same county: Kanabec County Fire 154.7400 MHz, narrow FM, 116 DPL.
Do fire departments and EMS use a trunked radio system in Knife Lake?
Yes. The county-level systems that cover Knife Lake are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Knife Lake?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Knife Lake?
For Knife Lake, start with the Olgilvie site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 853.075, 853.875 MHz. Program a control channel first; the scanner finds the voice channels from it.