Skip to content

Pelan Fire and EMS Frequencies

We do not have frequencies listed specifically for Pelan in Kittson County, Minnesota yet. Countywide channels for Kittson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lake Bronson (Allied Radio Matrix for Emergency Response (ARMER)), about 7 miles away.

About Pelan Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Pelan: Kittson County Fire 154.3700 MHz, narrow FM, 114.8 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Kittson County Fire talkgroup 50703 (hex c60f).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Pelan, start with the Lake Bronson site of Allied Radio Matrix for Emergency Response (ARMER), about 7 miles away. Its control channels: 851.1625, 854.0875 MHz.

Data updated .

Kittson County channels that also cover Pelan

Fire Dispatch

Fire Dispatch frequencies for Kittson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kittson County FireCounty Fire154.3700114.8 PLFMNWPKI594

Hospitals & Medical

Hospitals & Medical frequencies for Kittson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kittson County HospitalKittson Memorial Hosp.155.3250110.9 PLFMNKT0509

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Kittson County FireKittson Fire/EMS Dispatch50703c60fD
Kittson County FireLandcaster Fire Tactical50707c613D

Nearest trunked radio sites

Distances are measured from the center of Pelan.

Lake Bronson · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 1 (hex 1) · about 7 mi away
Control 851.1625, 854.0875
Voice 851.9625, 852.8875, 853.1
Juneberry · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 6 (hex 6) · about 13 mi away
Control 851.0375, 854.2875
Voice 851.9125, 852.1625, 853.4
Strandquist · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 87 (hex 57) · about 16 mi away
Control 853.875, 854.2625
Voice 851.7875, 852.0875, 853.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Pelan?

We do not have a fire dispatch channel listed specifically for Pelan. The county-level fire dispatch channels in the same county: Kittson County Fire 154.3700 MHz, narrow FM, 114.8 PL.

Do fire departments and EMS use a trunked radio system in Pelan?

Yes. The county-level systems that cover Pelan are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Pelan?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Pelan?

For Pelan, start with the Lake Bronson site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.1625, 854.0875 MHz. Program a control channel first; the scanner finds the voice channels from it.