About Hantho Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Hantho: Lac Qui Parle County Fire 154.1600 MHz, narrow FM, 110.9 PL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Lac qui Parle County channels that also cover Hantho
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lac Qui Parle County Fire | County Paging | 154.1600 In 153.8900 | 110.9 PL | FMN | WPJG299 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lac Qui Parle County Hospital | Johnson Memorial Hospital | 155.4000 | 114.8 PL | FMN | KDW529 |
| Lac Qui Parle County Hospital | Madison Hospital | 155.4000 | 131.8 PL | FMN | KWF729 |
Nearest trunked radio sites
Distances are measured from the center of Hantho.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Hantho?
We do not have a fire dispatch channel listed specifically for Hantho. The county-level fire dispatch channels in the same county: Lac Qui Parle County Fire 154.1600 MHz, narrow FM, 110.9 PL.
What scanner do I need to listen to fire and EMS in Hantho?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Hantho?
For Hantho, start with the Appleton site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.5625, 853.3625 MHz. Program a control channel first; the scanner finds the voice channels from it.