Skip to content

Walter Fire and EMS Frequencies

We do not have frequencies listed specifically for Walter in Lac qui Parle County, Minnesota yet. Countywide channels for Lac qui Parle County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Madison (Allied Radio Matrix for Emergency Response (ARMER)), about 13 miles away.

About Walter Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Walter: Lac Qui Parle County Fire 154.1600 MHz, narrow FM, 110.9 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Lac qui Parle County channels that also cover Walter

Fire Dispatch

Fire Dispatch frequencies for Lac qui Parle County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lac Qui Parle County FireCounty Paging154.1600
In 153.8900
110.9 PLFMNWPJG299

Hospitals & Medical

Hospitals & Medical frequencies for Lac qui Parle County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lac Qui Parle County HospitalJohnson Memorial Hospital155.4000114.8 PLFMNKDW529
Lac Qui Parle County HospitalMadison Hospital155.4000131.8 PLFMNKWF729

Nearest trunked radio sites

Distances are measured from the center of Walter.

Madison · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 96 (hex 60) · NAC 40B · about 13 mi away
Control 855.2125, 857.2125
Voice 851.425, 852.4, 853.875
Correll · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 28 (hex 1C) · NAC 40F · about 17 mi away
Control 852.9875, 853.4
Voice 851.475, 851.75, 851.9
Ortonville · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 86 (hex 56) · NAC 405 · about 18 mi away
Control 858.4875, 859.4875
Voice 856.4875, 857.4875, 860.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Walter?

We do not have a fire dispatch channel listed specifically for Walter. The county-level fire dispatch channels in the same county: Lac Qui Parle County Fire 154.1600 MHz, narrow FM, 110.9 PL.

What scanner do I need to listen to fire and EMS in Walter?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Walter?

For Walter, start with the Madison site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 855.2125, 857.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.