Skip to content

Hansonville Fire and EMS Frequencies

We do not have frequencies listed specifically for Hansonville in Lincoln County, Minnesota yet. Countywide channels for Lincoln County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Ivanhoe (Allied Radio Matrix for Emergency Response (ARMER)), about 7 miles away.

About Hansonville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Hansonville: Lincoln County Fire 155.0250 MHz, narrow FM, 110.9 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Lincoln County channels that also cover Hansonville

Fire Dispatch

Fire Dispatch frequencies for Lincoln County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lincoln County FireLincoln County Fire – South Tower / Paging / Fire Dispatch155.0250
In 153.9050
110.9 PLFMNKNEC875

Hospitals & Medical

Hospitals & Medical frequencies for Lincoln County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lincoln County HospitalHendricks Community Hospital155.400074.4 PLFMNWPLX253

Nearest trunked radio sites

Distances are measured from the center of Hansonville.

Ivanhoe · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 92 (hex 5C) · NAC 403 · about 7 mi away
Control 851.9375, 856.4625
Voice 852.9375, 853.4375, 857.4625, 858.2625
Canby · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 93 (hex 5D) · about 17 mi away
Control 853.4625, 858.4625
Voice 852.4625, 858.7625, 859.7625
Minneota · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 77 (hex 4D) · about 20 mi away
Control 853.55, 853.8
Voice 851.0875, 851.3375, 852.25
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Hansonville?

We do not have a fire dispatch channel listed specifically for Hansonville. The county-level fire dispatch channels in the same county: Lincoln County Fire 155.0250 MHz, narrow FM, 110.9 PL.

What scanner do I need to listen to fire and EMS in Hansonville?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Hansonville?

For Hansonville, start with the Ivanhoe site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.9375, 856.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.