About Clover Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Clover: Mahnomen County Fire 154.3100 MHz, narrow FM, 123.0 PL. County-level ems dispatch that covers Clover: Mahnomen County EMS 155.6700 MHz, narrow FM, 123.0 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Mahnomen County EMS talkgroup 49107 (hex bfd3).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Clover, start with the Lengby site of Allied Radio Matrix for Emergency Response (ARMER), about 9 miles away. Its control channels: 859.2125, 859.4375 MHz.
Data updated .
Mahnomen County channels that also cover Clover
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mahnomen County Fire | Mahnomen County Fire Paging | 154.3100 | 123.0 PL | FMN | WZX538 |
| Mahnomen County Fire | Mahnomen County Fire Operations | 154.3100 In 159.0000 | NAC 310 | P25 | WZX538 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mahnomen County EMS | Mahnomen County EMS – EMS – Paging X 2 "900" | 155.6700 In 158.9400 | 123.0 PL | FMN | WNYF331 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mahnomen County Hospital | Mahnomen Co. Health | 155.3250 | 71.9 PL | FMN | KTK693 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Mahnomen County EMS | Mahnomen Co EMS | 49107 | bfd3 | D |
Nearest trunked radio sites
Distances are measured from the center of Clover.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Clover?
We do not have a fire dispatch channel listed specifically for Clover. The county-level fire dispatch channels in the same county: Mahnomen County Fire 154.3100 MHz, narrow FM, 123.0 PL.
What frequency does EMS or the ambulance service use in Clover?
We do not have a EMS dispatch channel listed specifically for Clover. The county-level EMS dispatch channels in the same county: Mahnomen County EMS 155.6700 MHz, narrow FM, 123.0 PL.
Do fire departments and EMS use a trunked radio system in Clover?
Yes. The county-level systems that cover Clover are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Clover?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Clover?
For Clover, start with the Lengby site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 859.2125, 859.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.