About Marsh Grove Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Marsh Grove: Marshall County Fire 154.2050 MHz, narrow FM, 114.8 PL. County-level ems dispatch that covers Marsh Grove: Marshall County EMS 155.9550 MHz, narrow FM, 127.3 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Marshall County Fire talkgroup 51308 (hex c86c).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Marsh Grove, start with the Strandquist site of Allied Radio Matrix for Emergency Response (ARMER), about 7 miles away. Its control channels: 853.875, 854.2625 MHz.
Data updated .
Marshall County channels that also cover Marsh Grove
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marshall County Fire | County Fire Depts. | 154.2050 | 114.8 PL | FMN | — |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marshall County Fire | Warren Public Works/Fire | 155.6250 In 154.9500 | 114.8 PL | FMN | KCE892 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marshall County EMS | Warren EMS Page | 155.9550 | 127.3 PL | FMN | KCE892 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marshall County Hospital | North Valley Health Center | 155.3250 | 127.3 PL | FMN | WPYN796 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Marshall County Fire | Marshall Fire Main | 51308 | c86c | D |
| Marshall County Fire | Marshall Fire Tactical | 51309 | c86d | D |
| Marshall County Fire | Marshall County Fire – Tactical Channel | 51311 | c86f | D |
| Marshall County EMS | Marshall EMS | 51314 | c872 | D |
Nearest trunked radio sites
Distances are measured from the center of Marsh Grove.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Marsh Grove?
We do not have a fire dispatch channel listed specifically for Marsh Grove. The county-level fire dispatch channels in the same county: Marshall County Fire 154.2050 MHz, narrow FM, 114.8 PL.
What frequency does EMS or the ambulance service use in Marsh Grove?
We do not have a EMS dispatch channel listed specifically for Marsh Grove. The county-level EMS dispatch channels in the same county: Marshall County EMS 155.9550 MHz, narrow FM, 127.3 PL.
Do fire departments and EMS use a trunked radio system in Marsh Grove?
Yes. The county-level systems that cover Marsh Grove are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Marsh Grove?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Marsh Grove?
For Marsh Grove, start with the Strandquist site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 853.875, 854.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.