About Hassan Valley Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Hassan Valley: McLeod County Fire 154.4150 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example McLeod County Fire talkgroup 33208 (hex 81b8).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Hassan Valley, start with the McLeod Co. - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER), about 3 miles away. Its control channels: 852.75, 853.125 MHz.
Data updated .
McLeod County channels that also cover Hassan Valley
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McLeod County Fire | McLeod County Fire Paging | 154.4150 In 151.3550 | CSQ | FMN | WNSF580 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McLeod County Hospital | Hutchinson Community Hospital/Ambulance | 155.4000 | 107.2 PL | FMN | KUE469 |
| McLeod County Hospital | Glencoe Area Health Center | 155.4000 | 146.2 PL | FMN | KWI995 |
| McLeod County Hospital | Meeker County Memorial Hospital | 155.4000 | 110.9 PL | FMN | KNDT250 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| McLeod County Fire | County Fire Dispatch | 33208 | 81b8 | D |
| McLeod County Fire | Hutch Fire Administration | 33224 | 81c8 | D |
| McLeod County EMS | County EMS | 33221 | 81c5 | D |
| McLeod County Hospital | Glencoe Hospital ER | 33220 | 81c4 | D |
| McLeod County Hospital | Hutchinson Hospital ER | 33222 | 81c6 | D |
| McLeod County Hospital | Glencoe Hospital/EMS Administration | 33227 | 81cb | D |
Nearest trunked radio sites
Distances are measured from the center of Hassan Valley.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Hassan Valley?
We do not have a fire dispatch channel listed specifically for Hassan Valley. The county-level fire dispatch channels in the same county: McLeod County Fire 154.4150 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Hassan Valley?
Yes. The county-level systems that cover Hassan Valley are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Hassan Valley?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Hassan Valley?
For Hassan Valley, start with the McLeod Co. - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.75, 853.125 MHz. Program a control channel first; the scanner finds the voice channels from it.