Skip to content

Murray County Fire and EMS Frequencies

Murray County in Minnesota has 2 countywide conventional frequencies and 5 countywide talkgroups in our database. Use the list of 27 cities and communities below for local fire departments and EMS agencies.

About Murray County Fire and EMS Frequencies

Quick answer: Fire dispatch for Murray County: Murray County Fire 154.1450 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Murray County Fire talkgroup 30502 (hex 7726).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Murray County, start with the Slayton site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 851.875, 853.375 MHz.

Data updated .

Murray County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Murray County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Murray County FireFire Paging154.1450CSQFMNWNVN273

Hospitals & Medical

Hospitals & Medical frequencies for Murray County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Murray County HospitalMurray County Hospital155.4000127.3 PLFMNWRD888

Murray County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Murray County FireCounty Fire Main305027726D
Murray County FireDovary Fire Department30510772eD
Murray County EMSMurray County EMS Main305047728D
Murray County EMSCounty305307742D
Murray County HospitalMurray County Hospital Main305057729D

Radio system sites in Murray County

Program the control channel first; your scanner finds the voice channels from it.

Slayton · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 26 (hex 1A)
Control 851.875, 853.375
Voice 855.7125, 856.7375, 858.2125
Chandler · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 36 (hex 24) · NAC 400
Control 851.425, 856.4375
Voice 852.875, 853.425, 859.2625
Tracy · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 91 (hex 5B)
Control 852.4875, 855.4625
Voice 852.9875, 856.9875, 857.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Murray County

Common questions

What frequency does the fire department use in Murray County?

Fire dispatch channels listed for Murray County: Murray County Fire 154.1450 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Murray County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Murray County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Murray County?

For Murray County, start with the Slayton site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.875, 853.375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Murray County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Murray County are marked encrypted.

Are Murray County fire and EMS talkgroups encrypted?

None of the 5 talkgroups listed for Murray County are marked encrypted.