About Elk Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Elk: Nobles County Fire 154.4450 MHz, narrow FM, 100.0 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Nobles County Fire talkgroup 31112 (hex 7988).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Elk, start with the Worthington site of Allied Radio Matrix for Emergency Response (ARMER), about 8 miles away. Its control channels: 852.9375, 859.9875 MHz.
Data updated .
Nobles County channels that also cover Elk
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Nobles County Fire | Nobles County Fire | 154.4450 In 153.9050 | 100.0 PL | FMN | WNIR501 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Nobles County Fire | Nobles County Fire | 153.9500 | FMN | WNIR501 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Nobles County Hospital | Worthington Regional Hospital | 155.4000 | 85.4 PL | FMN | KKL840 |
| Regional Hospitals | Arnold Memorial Healthcare Center | 155.4000 | 123.0 PL | FMN | KNBD916 |
| Regional Hospitals | Worthington Regional Hospital | 155.4000 | 85.4 PL | FMN | KKL840 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Nobles County Fire | County Fire Dispatch | 31112 | 7988 | D |
| Nobles County Hospital | Worthington Regional Hospital | 31125 | 7995 | D |
Nearest trunked radio sites
Distances are measured from the center of Elk.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Elk?
We do not have a fire dispatch channel listed specifically for Elk. The county-level fire dispatch channels in the same county: Nobles County Fire 154.4450 MHz, narrow FM, 100.0 PL.
Do fire departments and EMS use a trunked radio system in Elk?
Yes. The county-level systems that cover Elk are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Elk?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Elk?
For Elk, start with the Worthington site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.9375, 859.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.