Skip to content

Elmo Fire and EMS Frequencies

We do not have frequencies listed specifically for Elmo in Otter Tail County, Minnesota yet. Countywide channels for Otter Tail County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Parkers Prairie (Allied Radio Matrix for Emergency Response (ARMER)), about 7 miles away.

About Elmo Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Elmo: Otter Tail County Fire 158.8050 MHz, narrow FM, 123.0 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Otter Tail County Fire talkgroup 27910 (hex 6d06).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Elmo, start with the Parkers Prairie site of Allied Radio Matrix for Emergency Response (ARMER), about 7 miles away. Its control channels: 851.9, 859.9875 MHz.

Data updated .

Otter Tail County channels that also cover Elmo

Fire Dispatch

Fire Dispatch frequencies for Otter Tail County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Otter Tail County FirePaging X158.8050
In 153.8450
123.0 PLFMNKWL264

EMS Tactical

EMS Tactical frequencies for Otter Tail County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Otter Tail County EMSPelican Rapids Police / EMS Tactical156.4250CSQFMMARINE

Hospitals & Medical

Hospitals & Medical frequencies for Otter Tail County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Otter Tail County HospitalCounty Hospital / EMS Interop155.3550123.0 PLFMNWPMN804
Otter Tail County HospitalOtter Tail County Patient Reports155.3550123.0 PLFMNWPMN804

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Otter Tail County FireCounty Fire EMS Dispatch279106d06D
Otter Tail County FireCounty 911 Paging – 158.805 VHF279116d07D
Otter Tail County FireRothsay Fire Department279526d30D
Otter Tail County EMSOtter Tail County EMS – Tactical Channel279636d3bD
Otter Tail County EMSRingdahl EMS279646d3cD

Nearest trunked radio sites

Distances are measured from the center of Elmo.

Parkers Prairie · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 93 (hex 5D) · about 7 mi away
Control 851.9, 859.9875
Voice 852.275, 852.4875, 853.425, 857.9875
Henning · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 27 (hex 1B) · about 7 mi away
Control 852.925, 853.175
Voice 851.775, 852.225, 852.275, 852.725
Hewitt · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 97 (hex 61) · NAC 405 · about 14 mi away
Control 851.425, 857.4375
Voice 851.1125, 851.875, 856.4375, 856.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Elmo?

We do not have a fire dispatch channel listed specifically for Elmo. The county-level fire dispatch channels in the same county: Otter Tail County Fire 158.8050 MHz, narrow FM, 123.0 PL.

Do fire departments and EMS use a trunked radio system in Elmo?

Yes. The county-level systems that cover Elmo are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Elmo?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Elmo?

For Elmo, start with the Parkers Prairie site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.9, 859.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.