Skip to content

Danforth Fire and EMS Frequencies

We do not have frequencies listed specifically for Danforth in Pine County, Minnesota yet. Countywide channels for Pine County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Pine Co. Simulcast (Allied Radio Matrix for Emergency Response (ARMER)), about 6 miles away.

About Danforth Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Danforth: Pine County Fire 151.2275 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Pine County Fire talkgroup 7207 (hex 1c27).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Danforth, start with the Pine Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER), about 6 miles away. Its control channels: 856.9875, 858.4875 MHz.

Data updated .

Pine County channels that also cover Danforth

Fire Dispatch

Fire Dispatch frequencies for Pine County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pine County FirePine County Fire – Paging151.2275CSQFMNWQPK405
Pine County FirePine County Fire – Dispatch154.1450
In 153.7700
192.8 PLFMNWNQA256

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Pine County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pine County FirePine City Fire Tactical153.8900192.8 PLFMNKNIV370

Hospitals & Medical

Hospitals & Medical frequencies for Pine County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pine County HospitalPine Medical Center – Sandstone155.3850123.0 PLFMNWQDI847

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Pine County FirePine County Fire – Dispatch72071c27D
Pine County FirePine County Fire – Fire Ground72081c28D
Pine County FirePine Fire All72091c29D
Pine County FireDuxbury Fire72261c3aD
Pine County EMSAmbulance Main72111c2bD
Pine County EMSWelia Ambulance72121c2cD
Pine County HospitalSandstone Hospital – Essentia Health72341c42D

Nearest trunked radio sites

Distances are measured from the center of Danforth.

Pine Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 41 (hex 29) · about 6 mi away
Control 856.9875, 858.4875
Voice 855.7125, 856.4375, 857.9375, 858.7375, 858.9875, 859.4875
Moose Lake - Prison · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 33 (hex 21) · about 24 mi away
Control 855.9625
Voice 856.2375, 856.7625, 857.7125, 857.9875, 859.7625
Moose Lake Lookout · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 19 (hex 13) · NAC 401 · about 26 mi away
Control 852.2, 858.9375, 859.2125
Voice 851.3875, 852.3875, 854.1875, 854.6375, 856.9375, 859.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Danforth?

We do not have a fire dispatch channel listed specifically for Danforth. The county-level fire dispatch channels in the same county: Pine County Fire 151.2275 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Danforth?

Yes. The county-level systems that cover Danforth are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Danforth?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Danforth?

For Danforth, start with the Pine Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 856.9875, 858.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.