About Munch Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Munch: Pine County Fire 151.2275 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Pine County Fire talkgroup 7207 (hex 1c27).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Munch, start with the Pine Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER), about 11 miles away. Its control channels: 856.9875, 858.4875 MHz.
Data updated .
Pine County channels that also cover Munch
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pine County Fire | Pine County Fire – Paging | 151.2275 | CSQ | FMN | WQPK405 |
| Pine County Fire | Pine County Fire – Dispatch | 154.1450 In 153.7700 | 192.8 PL | FMN | WNQA256 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pine County Fire | Pine City Fire Tactical | 153.8900 | 192.8 PL | FMN | KNIV370 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pine County Hospital | Pine Medical Center – Sandstone | 155.3850 | 123.0 PL | FMN | WQDI847 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pine County Fire | Pine County Fire – Dispatch | 7207 | 1c27 | D |
| Pine County Fire | Pine County Fire – Fire Ground | 7208 | 1c28 | D |
| Pine County Fire | Pine Fire All | 7209 | 1c29 | D |
| Pine County Fire | Duxbury Fire | 7226 | 1c3a | D |
| Pine County EMS | Ambulance Main | 7211 | 1c2b | D |
| Pine County EMS | Welia Ambulance | 7212 | 1c2c | D |
| Pine County Hospital | Sandstone Hospital – Essentia Health | 7234 | 1c42 | D |
Nearest trunked radio sites
Distances are measured from the center of Munch.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Munch?
We do not have a fire dispatch channel listed specifically for Munch. The county-level fire dispatch channels in the same county: Pine County Fire 151.2275 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Munch?
Yes. The county-level systems that cover Munch are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Munch?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Munch?
For Munch, start with the Pine Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 856.9875, 858.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.