Skip to content

Browns Creek Fire and EMS Frequencies

We do not have frequencies listed specifically for Browns Creek in Red Lake County, Minnesota yet. Countywide channels for Red Lake County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Red Lake Falls (Allied Radio Matrix for Emergency Response (ARMER)), about 2 miles away.

About Browns Creek Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Browns Creek: Red Lake County Fire 154.2200 MHz, narrow FM, 114.8 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Red Lake County channels that also cover Browns Creek

Fire Dispatch

Fire Dispatch frequencies for Red Lake County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Red Lake County FireCounty Page154.2200114.8 PLFMNWQGR301

Nearest trunked radio sites

Distances are measured from the center of Browns Creek.

Red Lake Falls · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 91 (hex 5B) · about 2 mi away
Control 851.2125, 855.2125, 857.2125
Voice 855.7125, 856.7125, 859.7625
Plummer · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 92 (hex 5C) · about 10 mi away
Control 853.475, 855.4625
Voice 851.9, 857.9375, 858.9625
Thief River Falls · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 90 (hex 5A) · about 12 mi away
Control 851.3125, 852.9
Voice 852.0625, 852.2, 853.625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Browns Creek?

We do not have a fire dispatch channel listed specifically for Browns Creek. The county-level fire dispatch channels in the same county: Red Lake County Fire 154.2200 MHz, narrow FM, 114.8 PL.

What scanner do I need to listen to fire and EMS in Browns Creek?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Browns Creek?

For Browns Creek, start with the Red Lake Falls site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.2125, 855.2125, 857.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.