About Terrebonne Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Terrebonne: Red Lake County Fire 154.2200 MHz, narrow FM, 114.8 PL.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
Data updated .
Red Lake County channels that also cover Terrebonne
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Red Lake County Fire | County Page | 154.2200 | 114.8 PL | FMN | WQGR301 |
Nearest trunked radio sites
Distances are measured from the center of Terrebonne.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Terrebonne?
We do not have a fire dispatch channel listed specifically for Terrebonne. The county-level fire dispatch channels in the same county: Red Lake County Fire 154.2200 MHz, narrow FM, 114.8 PL.
What scanner do I need to listen to fire and EMS in Terrebonne?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Terrebonne?
For Terrebonne, start with the Plummer site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 853.475, 855.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.