Skip to content

Crooks Fire and EMS Frequencies

We do not have frequencies listed specifically for Crooks in Renville County, Minnesota yet. Countywide channels for Renville County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Danube (Allied Radio Matrix for Emergency Response (ARMER)), about 1 miles away.

About Crooks Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Crooks: Renville County Fire 153.8000 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Renville County Fire talkgroup 29509 (hex 7345).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Crooks, start with the Danube site of Allied Radio Matrix for Emergency Response (ARMER), about 1 miles away. Its control channels: 851.925, 856.7125 MHz.

Data updated .

Renville County channels that also cover Crooks

Fire Dispatch

Fire Dispatch frequencies for Renville County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Renville County FireRenville County Fire – Paging153.8000
In 156.0150
CSQFMNKAO467

Hospitals & Medical

Hospitals & Medical frequencies for Renville County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Renville County HospitalRenville County Hospital155.4000114.8 PLFMNKNDV877

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Renville County FireFire EMS Paging – 153.800 VHF295097345D
Renville County FireFire EMS Dispatch295117347D
Renville County HospitalRenville County Hospital29515734bD

Nearest trunked radio sites

Distances are measured from the center of Crooks.

Danube · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 85 (hex 55) · NAC 405 · about 1 mi away
Control 851.925, 856.7125
Voice 853.475, 853.8875, 858.7375, 859.7375
Olivia · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 79 (hex 4F) · about 10 mi away
Control 853.2375, 853.3875
Voice 851.325, 851.7125, 852.2
Lake Lillian · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 33 (hex 21) · about 18 mi away
Control 851.2875, 851.975
Voice 851.0375, 852.15, 853.05, 853.5875, 853.8375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Crooks?

We do not have a fire dispatch channel listed specifically for Crooks. The county-level fire dispatch channels in the same county: Renville County Fire 153.8000 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Crooks?

Yes. The county-level systems that cover Crooks are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Crooks?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Crooks?

For Crooks, start with the Danube site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.925, 856.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.