Skip to content

Wellington Fire and EMS Frequencies

We do not have frequencies listed specifically for Wellington in Renville County, Minnesota yet. Countywide channels for Renville County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Gibbon (Allied Radio Matrix for Emergency Response (ARMER)), about 6 miles away.

About Wellington Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Wellington: Renville County Fire 153.8000 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Renville County Fire talkgroup 29509 (hex 7345).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Wellington, start with the Gibbon site of Allied Radio Matrix for Emergency Response (ARMER), about 6 miles away. Its control channels: 852.3125, 852.6 MHz.

Data updated .

Renville County channels that also cover Wellington

Fire Dispatch

Fire Dispatch frequencies for Renville County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Renville County FireRenville County Fire – Paging153.8000
In 156.0150
CSQFMNKAO467

Hospitals & Medical

Hospitals & Medical frequencies for Renville County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Renville County HospitalRenville County Hospital155.4000114.8 PLFMNKNDV877

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Renville County FireFire EMS Paging – 153.800 VHF295097345D
Renville County FireFire EMS Dispatch295117347D
Renville County HospitalRenville County Hospital29515734bD

Nearest trunked radio sites

Distances are measured from the center of Wellington.

Gibbon · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 26 (hex 1A) · about 6 mi away
Control 852.3125, 852.6
Voice 851.625, 851.95, 853.0625, 853.5625
Morton · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 87 (hex 57) · about 15 mi away
Control 856.4875, 857.4875
Voice 851.3875, 852.475, 858.4875, 859.4875
Evan · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 28 (hex 1C) · about 15 mi away
Control 852.9, 856.4375
Voice 851.9, 852.4, 858.7625, 859.7625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Wellington?

We do not have a fire dispatch channel listed specifically for Wellington. The county-level fire dispatch channels in the same county: Renville County Fire 153.8000 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Wellington?

Yes. The county-level systems that cover Wellington are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Wellington?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Wellington?

For Wellington, start with the Gibbon site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.3125, 852.6 MHz. Program a control channel first; the scanner finds the voice channels from it.