About Sand Creek Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Sand Creek: Scott County Fire 154.1450 MHz, narrow FM, 136.5 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Scott County Fire talkgroup 4814 (hex 12ce).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 17 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Sand Creek, start with the Carver - Scott Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER), about 1 miles away. Its control channels: 851.8875, 852.075, 852.4375 MHz.
Data updated .
Scott County channels that also cover Sand Creek
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scott County Fire | Fire Paging | 154.1450 | 136.5 PL | FMN | KWM573 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scott County Hospital | Queen of Peace Hospital – New Prague | 155.3550 | 103.5 PL | FMN | WPNU502 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Scott County Fire | Mdewakanton Sioux Fire – EMS Dispatch | 4814 | 12ce | D |
| Scott County Fire | Fire Department ROAM | 4892 | 131c | D |
| Scott County Fire | Mdewakanton Med Sioux Fire Tactical | 4816 | 12d0 | D |
| Scott County Fire | Mdewakanton Sioux Med Fire Tactical | 4818 | 12d2 | D |
| Scott County Fire | Mdewakanton Sioux MW Operations | 4820 | 12d4 | D |
| Scott County Fire | Scott County Fire – Fire Ground | 4874 | 130a | D |
| Scott County Fire | Scott County Fire – Fire Ground | 4876 | 130c | D |
| Scott County Fire | Scott County Fire – Fire Ground | 4878 | 130e | D |
| Scott County Fire | Scott County Fire – Fire Ground | 4880 | 1310 | D |
| Scott County Fire | Scott County Fire – Fire Ground | 4882 | 1312 | D |
| Scott County Fire | Scott County Fire – Fire Ground | 4884 | 1314 | D |
| Scott County Fire | Scott County Fire – Fire Ground | 4886 | 1316 | D |
| Scott County Fire | Scott County Fire – Fire Ground | 4888 | 1318 | D |
| Scott County Fire | Belle Plain Fire T2T | 4894 | 131e | D |
| Scott County Fire | Fire Department Interop | 4890 | 131a | D |
| Scott County EMS | County Fire Dispatch | 4812 | 12cc | D |
| Scott County Hospital | Queen of Peace Hospital | 4918 | 1336 | D |
Nearest trunked radio sites
Distances are measured from the center of Sand Creek.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Sand Creek?
We do not have a fire dispatch channel listed specifically for Sand Creek. The county-level fire dispatch channels in the same county: Scott County Fire 154.1450 MHz, narrow FM, 136.5 PL.
Do fire departments and EMS use a trunked radio system in Sand Creek?
Yes. The county-level systems that cover Sand Creek are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 17 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Sand Creek?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Sand Creek?
For Sand Creek, start with the Carver - Scott Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.8875, 852.075, 852.4375, 853.7875 MHz. Program a control channel first; the scanner finds the voice channels from it.