Skip to content

Gaylord Fire and EMS Frequencies

Gaylord in Sibley County, Minnesota has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Gaylord (Allied Radio Matrix for Emergency Response (ARMER)), about 0 miles away.

About Gaylord Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Gaylord: Sibley County Fire 156.2400 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Gaylord Fire talkgroup 33429 (hex 8295).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup; Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Gaylord, start with the Gaylord site of Allied Radio Matrix for Emergency Response (ARMER), about 0 miles away. Its control channels: 852.125, 853.625 MHz.

Data updated .

Gaylord trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Gaylord FireGaylord Fire Department T2T334298295D

Sibley County channels that also cover Gaylord

Fire Dispatch

Fire Dispatch frequencies for Sibley County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sibley County FireSibley County Fire – Paging156.2400
In 153.9200
CSQFMNWRXX242

Hospitals & Medical

Hospitals & Medical frequencies for Sibley County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sibley County HospitalSibley Medical Center155.3550186.2 PLFMNKKL780

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Sibley County FireCounty Fire EMS Dispatch334088280D
Sibley County FireGreen Isle T2T334288294D
Sibley County HospitalEMH-SMC Sibley Medical Center – Arlington334128284D

Nearest trunked radio sites

Distances are measured from the center of Gaylord.

Gaylord · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 27 (hex 1B) · about 0 mi away
Control 852.125, 853.625
Voice 851.775, 852.725, 852.975, 853.9
Arlington · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 1 (hex 1) · about 7 mi away
Control 851.65, 855.6125
Voice 851.225, 853.15, 859.1125
Gibbon · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 26 (hex 1A) · about 18 mi away
Control 852.3125, 852.6
Voice 851.625, 851.95, 853.0625, 853.5625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Gaylord?

We do not have a fire dispatch channel listed specifically for Gaylord. The county-level fire dispatch channels in the same county: Sibley County Fire 156.2400 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Gaylord?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Gaylord?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Gaylord?

For Gaylord, start with the Gaylord site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.125, 853.625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Gaylord fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Gaylord are marked encrypted.