Skip to content

Murdock Fire and EMS Frequencies

Murdock in Swift County, Minnesota has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Clara City (Allied Radio Matrix for Emergency Response (ARMER)), about 10 miles away.

About Murdock Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Murdock: Swift County Fire 154.1900 MHz, narrow FM, 179.9 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Murdock Fire talkgroup 25958 (hex 6566).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup; Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Murdock, start with the Clara City site of Allied Radio Matrix for Emergency Response (ARMER), about 10 miles away. Its control channels: 851.8875, 855.4875 MHz.

Data updated .

Murdock trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Murdock FireMurdock Fire Tactical259586566D

Swift County channels that also cover Murdock

Fire Dispatch

Fire Dispatch frequencies for Swift County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Swift County FireBenson Fire154.1900179.9 PLFMNKBP679
Swift County FireCounty Fire Pagers154.3550
In 158.8800
179.9 PLFMNWNQW864

Hospitals & Medical

Hospitals & Medical frequencies for Swift County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Swift County HospitalAppleton Municipal Hospital155.4000156.7 PLFMNKNBW206
Swift County HospitalSwift County – Benson155.400097.4 PLFMNKWV617

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Swift County FireFire/EMS Paging25950655eD
Swift County HospitalBenson Hospital Emergency Room259726574D

Nearest trunked radio sites

Distances are measured from the center of Murdock.

Clara City · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 99 (hex 63) · about 10 mi away
Control 851.8875, 855.4875
Voice 853.1, 853.375, 854.9875
Benson · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 1 (hex 1) · NAC 40D · about 10 mi away
Control 856.4375, 860.4375
Voice 857.4375, 858.4375, 859.4375
Willmar · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 19 (hex 13) · about 19 mi away
Control 859.9625, 860.9625
Voice 852.275, 852.875, 856.9625, 857.9625, 858.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Murdock?

We do not have a fire dispatch channel listed specifically for Murdock. The county-level fire dispatch channels in the same county: Swift County Fire 154.1900 MHz, narrow FM, 179.9 PL.

Do fire departments and EMS use a trunked radio system in Murdock?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Murdock?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Murdock?

For Murdock, start with the Clara City site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.8875, 855.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Murdock fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Murdock are marked encrypted.