Skip to content

Six Mile Grove Fire and EMS Frequencies

We do not have frequencies listed specifically for Six Mile Grove in Swift County, Minnesota yet. Countywide channels for Swift County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Benson (Allied Radio Matrix for Emergency Response (ARMER)), about 7 miles away.

About Six Mile Grove Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Six Mile Grove: Swift County Fire 154.1900 MHz, narrow FM, 179.9 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Swift County Fire talkgroup 25950 (hex 655e).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Six Mile Grove, start with the Benson site of Allied Radio Matrix for Emergency Response (ARMER), about 7 miles away. Its control channels: 856.4375, 860.4375 MHz.

Data updated .

Swift County channels that also cover Six Mile Grove

Fire Dispatch

Fire Dispatch frequencies for Swift County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Swift County FireBenson Fire154.1900179.9 PLFMNKBP679
Swift County FireCounty Fire Pagers154.3550
In 158.8800
179.9 PLFMNWNQW864

Hospitals & Medical

Hospitals & Medical frequencies for Swift County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Swift County HospitalAppleton Municipal Hospital155.4000156.7 PLFMNKNBW206
Swift County HospitalSwift County – Benson155.400097.4 PLFMNKWV617

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Swift County FireFire/EMS Paging25950655eD
Swift County HospitalBenson Hospital Emergency Room259726574D

Nearest trunked radio sites

Distances are measured from the center of Six Mile Grove.

Benson · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 1 (hex 1) · NAC 40D · about 7 mi away
Control 856.4375, 860.4375
Voice 857.4375, 858.4375, 859.4375
Holloway · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 10 (hex A) · NAC 404 · about 12 mi away
Control 856.9875, 857.9875
Voice 855.7125, 859.9875, 860.9875
Milan · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 98 (hex 62) · NAC 40a · about 14 mi away
Control 853.5, 859.2625
Voice 851.95, 852.4875, 852.9
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Six Mile Grove?

We do not have a fire dispatch channel listed specifically for Six Mile Grove. The county-level fire dispatch channels in the same county: Swift County Fire 154.1900 MHz, narrow FM, 179.9 PL.

Do fire departments and EMS use a trunked radio system in Six Mile Grove?

Yes. The county-level systems that cover Six Mile Grove are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Six Mile Grove?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Six Mile Grove?

For Six Mile Grove, start with the Benson site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 856.4375, 860.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.