Skip to content

Burnhamville Fire and EMS Frequencies

We do not have frequencies listed specifically for Burnhamville in Todd County, Minnesota yet. Countywide channels for Todd County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Long Prairie (Allied Radio Matrix for Emergency Response (ARMER)), about 12 miles away.

About Burnhamville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Burnhamville: Todd County Fire 154.2650 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Todd County Fire talkgroup 26908 (hex 691c).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Burnhamville, start with the Long Prairie site of Allied Radio Matrix for Emergency Response (ARMER), about 12 miles away. Its control channels: 857.7375, 858.7375 MHz.

Data updated .

Todd County channels that also cover Burnhamville

Fire Dispatch

Fire Dispatch frequencies for Todd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Todd County FirePaging X154.2650CSQFMNWNZL398

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Todd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Todd County FireCounty Fire – EMS Tactical155.0850156.7 PLFMNKJB954

Hospitals & Medical

Hospitals & Medical frequencies for Todd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Todd County HospitalLong Prairie Memorial Hospital155.3850156.7 PLFMNKVP726
Todd County HospitalLakewood Health Systems – Staples155.3850114.8 PLFMNWPKX763

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Todd County FireTodd County Fire – Dispatch26908691cD
Todd County FireAnnounce269286930D

Nearest trunked radio sites

Distances are measured from the center of Burnhamville.

Long Prairie · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 13 (hex D) · NAC 407 · about 12 mi away
Control 857.7375, 858.7375
Voice 851.55, 853.5, 854.5875, 856.7375, 859.7375
Freeport · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 4 (hex 4) · NAC 408 · about 13 mi away
Control 857.2625, 860.2625
Voice 856.2625, 857.0125, 858.2625, 859.2625
Sauk Centre · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 36 (hex 24) · NAC 40F · about 16 mi away
Control 854.3125, 854.5125
Voice 854.7125, 857.6875, 858.0875, 858.5875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Burnhamville?

We do not have a fire dispatch channel listed specifically for Burnhamville. The county-level fire dispatch channels in the same county: Todd County Fire 154.2650 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Burnhamville?

Yes. The county-level systems that cover Burnhamville are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Burnhamville?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Burnhamville?

For Burnhamville, start with the Long Prairie site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 857.7375, 858.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.