Skip to content

Washington County Fire and EMS Frequencies

Washington County in Minnesota has 1 countywide conventional frequency and 18 countywide talkgroups in our database. Use the list of 30 cities and communities below for local fire departments and EMS agencies.

About Washington County Fire and EMS Frequencies

Quick answer: Fire dispatch for Washington County: Washington County Fire 154.8450 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Washington County Fire talkgroup 3619 (hex e23).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 18 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Washington County, start with the Washington County Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 852.7875, 853.1875, 853.7375 MHz.

Data updated .

Washington County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County FireFire Paging154.8450CSQFMNWQKC555

Washington County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Washington County FireFire All Call3619e23D
Washington County FireFire Main Dispatch3750ea6D
Washington County FireSecondary Dispatch3752ea8D
Washington County FireFire Department Roaming3770ebaD
Washington County FireFire All Call3774ebeD
Washington County FireFire Truck to Truck3754eaaD
Washington County FireTactical A3756eacD
Washington County FireTactical B3758eaeD
Washington County FireTactical C3760eb0D
Washington County FireTactical D3762eb2D
Washington County FireTactical E3764eb4D
Washington County FireTactical F3766eb6D
Washington County FireFire Dive Team3768eb8D
Washington County FireFire Emergency3772ebcD
Washington County FireLower St. Croix Vly. Fire Operations3796ed4D
Washington County FireLower St. Croix Vly. Fire Operations3798ed6D
Washington County FireWashington County Fire – Fire Ground3832ef8D
Washington County FireSt Paul Park Refinery Fire Operations3836efcD

Radio system sites in Washington County

Program the control channel first; your scanner finds the voice channels from it.

Washington County Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 1 · Site 5 (hex 5) · NAC 405
Control 852.7875, 853.1875, 853.7375
Voice 851.1125, 851.3625, 851.7125, 851.9875, 852.125, 852.225, 852.35, 852.425, 852.625, 852.85, 853.525, 853.9, 856.5375, 857.5375, 860.9375
Oak Park Heights - Prison · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 1 · Site 97 (hex 61)
Control 859.0375
Voice 855.9875, 856.4875, 858.4875
Stillwater - Prison · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 1 · Site 99 (hex 63)
Control 859.4875
Voice 854.9875, 856.2125, 857.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Washington County

Common questions

What frequency does the fire department use in Washington County?

Fire dispatch channels listed for Washington County: Washington County Fire 154.8450 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Washington County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 18 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Washington County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Washington County?

For Washington County, start with the Washington County Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.7875, 853.1875, 853.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Washington County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Washington County are marked encrypted.

Are Washington County fire and EMS talkgroups encrypted?

None of the 18 talkgroups listed for Washington County are marked encrypted.