Skip to content

Prairie View Fire and EMS Frequencies

We do not have frequencies listed specifically for Prairie View in Wilkin County, Minnesota yet. Countywide channels for Wilkin County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Barnsville (Allied Radio Matrix for Emergency Response (ARMER)), about 2 miles away.

About Prairie View Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Prairie View: Wilkin County Fire 154.4150 MHz, narrow FM, 110.9 PL. County-level ems dispatch that covers Prairie View: Wilkin County EMS 155.6175 MHz, narrow FM, no tone. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Wilkin County Fire talkgroup 27701 (hex 6c35).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Prairie View, start with the Barnsville site of Allied Radio Matrix for Emergency Response (ARMER), about 2 miles away. Its control channels: 852.4375, 857.2375 MHz.

Data updated .

Wilkin County channels that also cover Prairie View

Fire Dispatch

Fire Dispatch frequencies for Wilkin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wilkin County FireCounty Fire Paging – Patch154.4150
In 150.7900
110.9 PLFMNWPYM765
Wilkin County FireFoxhome Fire Paging154.4300107.2 PLFMNWQCP502

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Wilkin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wilkin County FireBreckenridge Fire154.3850110.9 PLFMNWPMY682

EMS Dispatch

EMS Dispatch frequencies for Wilkin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wilkin County EMSASI EMS155.6175FMNWQVL562

Hospitals & Medical

Hospitals & Medical frequencies for Wilkin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wilkin County HospitalSt. Francis Hospital155.3550186.2 PLFMNWQDV418

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Wilkin County FireFire EMS Dispatch277016c35D

Nearest trunked radio sites

Distances are measured from the center of Prairie View.

Barnsville · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 89 (hex 59) · NAC 401 · about 2 mi away
Control 852.4375, 857.2375
Voice 852.9375, 853.4375, 854.1625, 856.2375
Kent - Foxhome · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 77 (hex 4D) · NAC 40F · about 16 mi away
Control 851.9125, 853.4125
Voice 851.4125, 855.7375, 857.4375
Erhard · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 91 (hex 5B) · NAC 404 · about 16 mi away
Control 852.4625, 858.4375
Voice 851.4625, 851.7875, 857.9625, 859.4375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Prairie View?

We do not have a fire dispatch channel listed specifically for Prairie View. The county-level fire dispatch channels in the same county: Wilkin County Fire 154.4150 MHz, narrow FM, 110.9 PL.

What frequency does EMS or the ambulance service use in Prairie View?

We do not have a EMS dispatch channel listed specifically for Prairie View. The county-level EMS dispatch channels in the same county: Wilkin County EMS 155.6175 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Prairie View?

Yes. The county-level systems that cover Prairie View are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Prairie View?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Prairie View?

For Prairie View, start with the Barnsville site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.4375, 857.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.