About Hermanville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Hermanville: Claiborne County Fire 154.1225 MHz, narrow FM, no tone. Trunked: Mississippi Wireless Information Network (MSWIN), for example Claiborne County Fire talkgroup 41153 (hex a0c1).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Mississippi Wireless Information Network (MSWIN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Hermanville, start with the Port Gibson site of Mississippi Wireless Information Network (MSWIN), about 8 miles away. Its control channels: 773.30625, 773.55625, 773.80625 MHz.
Data updated .
Claiborne County channels that also cover Hermanville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Claiborne County Fire | County Fire – Dispatch | 154.1225 In 158.9475 | FMN | WQES374 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Claiborne County Fire | County Fire – Fireground/Tactical | 153.8900 | FMN | WQES374 |
Mississippi Wireless Information Network (MSWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Claiborne County Fire | County Fire Dispatch | 41153 | a0c1 | T |
Nearest trunked radio sites
Distances are measured from the center of Hermanville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Hermanville?
We do not have a fire dispatch channel listed specifically for Hermanville. The county-level fire dispatch channels in the same county: Claiborne County Fire 154.1225 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Hermanville?
Yes. The county-level systems that cover Hermanville are Fire and EMS talkgroups are listed for Mississippi Wireless Information Network (MSWIN): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Hermanville?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Hermanville?
For Hermanville, start with the Port Gibson site of Mississippi Wireless Information Network (MSWIN). Its control channels are 773.30625, 773.55625, 773.80625 MHz. Program a control channel first; the scanner finds the voice channels from it.