Skip to content

Diamondhead Fire and EMS Frequencies

We do not have frequencies listed specifically for Diamondhead in Hancock County, Mississippi yet. Countywide channels for Hancock County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Waveland (Mississippi Wireless Information Network (MSWIN)), about 6 miles away.

About Diamondhead Fire and EMS Frequencies

Quick answer: Trunked: Mississippi Wireless Information Network (MSWIN), for example Hancock County Fire talkgroup 32387 (hex 7e83).

  • Trunked radio systems that carry fire and EMS traffic here: Mississippi Wireless Information Network (MSWIN): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Diamondhead, start with the Waveland site of Mississippi Wireless Information Network (MSWIN), about 6 miles away. Its control channels: 769.28125, 770.21875, 770.46875 MHz.

Data updated .

Hancock County channels that also cover Diamondhead

Mississippi Wireless Information Network (MSWIN)

Mississippi Wireless Information Network (MSWIN) talkgroups
AgencyDescriptionTalkgroupHexMode
Hancock County FireCounty Fire/EMS Dispatch323877e83T
Hancock County FireCounty Fire/EMS Fireground324007e90T

Nearest trunked radio sites

Distances are measured from the center of Diamondhead.

Waveland · Mississippi Wireless Information Network (MSWIN)
RFSS 1 · Site 51 (hex 33) · NAC 2A0 · about 6 mi away
Control 769.28125, 770.21875, 770.46875, 770.71875
Voice 773.94375
Kiln · Mississippi Wireless Information Network (MSWIN)
RFSS 1 · Site 50 (hex 32) · about 6 mi away
Control 851.1125, 851.575, 852.65, 852.9125
Voice 853.1875
Harrison County · Mississippi Wireless Information Network (MSWIN)
RFSS 1 · Site 17 (hex 11) · about 9 mi away
Control 773.06875, 773.31875, 773.56875, 773.81875
Voice 770.19375, 770.44375, 770.69375, 770.94375, 771.68125, 772.33125, 772.73125, 774.63125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Diamondhead?

Yes. The county-level systems that cover Diamondhead are Fire and EMS talkgroups are listed for Mississippi Wireless Information Network (MSWIN): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Diamondhead?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Diamondhead?

For Diamondhead, start with the Waveland site of Mississippi Wireless Information Network (MSWIN). Its control channels are 769.28125, 770.21875, 770.46875, 770.71875 MHz. Program a control channel first; the scanner finds the voice channels from it.