About Wheeler Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Wheeler: Prentiss County Fire 154.5700 MHz, narrow FM, no tone. County-level ems dispatch that covers Wheeler: Prentiss County EMS 155.1600 MHz, narrow FM, 116 DPL. Trunked: Mississippi Wireless Information Network (MSWIN), for example Prentiss County Fire talkgroup 55953 (hex da91).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Mississippi Wireless Information Network (MSWIN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Wheeler, start with the MDOT Prentiss site of Mississippi Wireless Information Network (MSWIN), about 9 miles away. Its control channels: 769.41875, 769.66875, 769.91875 MHz.
Data updated .
Wheeler conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wheeler Fire | Wheeler Fire Operations *EXPIRED* | 154.3550 | FM | WSL535 |
Prentiss County channels that also cover Wheeler
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Prentiss County Fire | Pisgah Community Vol. Fire Department Operations | 154.5700 | FMN | — | |
| Prentiss County Fire | Prentiss County Fire/EOC | 155.9850 In 158.8650 | 179.9 PL | FMN | WNYH494 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Prentiss County EMS | MedStat Ambulance – Dispatch | 155.1600 In 153.9050 | 116 DPL | FMN | WPUJ824 |
| Prentiss County EMS | Rescue Squad – Dispatch | 159.2925 In 151.4300 | FMN | WQMJ483 |
Mississippi Wireless Information Network (MSWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Prentiss County Fire | County Fire – Dispatch | 55953 | da91 | T |
Nearest trunked radio sites
Distances are measured from the center of Wheeler.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Wheeler?
We do not have a fire dispatch channel listed specifically for Wheeler. The county-level fire dispatch channels in the same county: Prentiss County Fire 154.5700 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Wheeler?
We do not have a EMS dispatch channel listed specifically for Wheeler. The county-level EMS dispatch channels in the same county: Prentiss County EMS 155.1600 MHz, narrow FM, 116 DPL.
Do fire departments and EMS use a trunked radio system in Wheeler?
Yes. The county-level systems that cover Wheeler are Fire and EMS talkgroups are listed for Mississippi Wireless Information Network (MSWIN): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Wheeler?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Wheeler?
For Wheeler, start with the MDOT Prentiss site of Mississippi Wireless Information Network (MSWIN). Its control channels are 769.41875, 769.66875, 769.91875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Wheeler fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Wheeler are marked encrypted.