About Glen Allan Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Glen Allan: Riverside Fire District 154.4000 MHz, narrow FM, no tone. County-level ems dispatch that covers Glen Allan: Washington County EMS 154.1450 MHz, narrow FM, 152 DPL. Trunked: Mississippi Wireless Information Network (MSWIN), for example Washington County Fire talkgroup 58881 (hex e601).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Mississippi Wireless Information Network (MSWIN): 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Glen Allan, start with the Grace site of Mississippi Wireless Information Network (MSWIN), about 4 miles away. Its control channels: 774.29375, 774.54375, 774.79375 MHz.
Data updated .
Washington County channels that also cover Glen Allan
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Riverside Fire District | Riverside FIre DIstrict | 154.4000 In 153.7700 | FMN | WQDT378 | |
| Riverside Fire District | Riverside FIre North Repeater | 453.0500 In 458.0500 | 173.8 PL | FMN | WQPZ776 |
| Riverside Fire District | Riverside FIre South Repeater | 460.6000 In 465.6000 | 173.8 PL | FMN | WNUN834 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Washington County EMS | MedSTAT EMS – Dispatch | 154.1450 In 158.8425 | 152 DPL | FMN | WQSD641 |
Mississippi Wireless Information Network (MSWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Washington County Fire | County Fire Dispatch | 58881 | e601 | T |
| Washington County Fire | Riverside Fire Main | 58942 | e63e | T |
| Washington County Fire | Indian Mound Fire Main | 58950 | e646 | T |
| Washington County Fire | Riverside Fire Tactical | 58943 | e63f | T |
| Washington County Fire | Indian Mound Fire Tactical | 58951 | e647 | T |
| Washington County EMS | County EMR Dispatch | 58954 | e64a | T |
| Washington County EMS | County EMR Tactical | 58955 | e64b | T |
| Washington County EMS | County EMR Tactical | 58956 | e64c | T |
| Washington County EMS | County EMR Tactical | 58957 | e64d | T |
| Washington County EMS | County EMR Tactical | 58958 | e64e | T |
| Washington County EMS | County EMR Tactical | 58959 | e64f | T |
Nearest trunked radio sites
Distances are measured from the center of Glen Allan.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Glen Allan?
We do not have a fire dispatch channel listed specifically for Glen Allan. The county-level fire dispatch channels in the same county: Riverside Fire District 154.4000 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Glen Allan?
We do not have a EMS dispatch channel listed specifically for Glen Allan. The county-level EMS dispatch channels in the same county: Washington County EMS 154.1450 MHz, narrow FM, 152 DPL.
Do fire departments and EMS use a trunked radio system in Glen Allan?
Yes. The county-level systems that cover Glen Allan are Fire and EMS talkgroups are listed for Mississippi Wireless Information Network (MSWIN): 11 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Glen Allan?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Glen Allan?
For Glen Allan, start with the Grace site of Mississippi Wireless Information Network (MSWIN). Its control channels are 774.29375, 774.54375, 774.79375 MHz. Program a control channel first; the scanner finds the voice channels from it.