Skip to content

Spruce Fire and EMS Frequencies

We do not have frequencies listed specifically for Spruce in Bates County, Missouri yet. Countywide channels for Bates County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Dayton / Aaron (Missouri Statewide Wireless Interoperable Network (MOSWIN)), about 6 miles away.

About Spruce Fire and EMS Frequencies

Quick answer: County-level ems dispatch that covers Spruce: Bates County Memorial Hospital 461.5625 MHz, narrow FM, 141.3 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Bates County channels that also cover Spruce

EMS Dispatch

EMS Dispatch frequencies for Bates County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bates County Memorial HospitalOperations (Dispatch-Clear, Mobiles-Encrypted)461.5625
In 466.5625
NAC 300P25 EncryptedWQLI778
Bates County Memorial HospitalBates County Memorial Hospital – Tone-Outs Only (Dispatched on P25)461.5625141.3 PLFMNWQLI778
Bates County Memorial HospitalBates County Memorial Hospital – Dispatch .462.9750
In 467.9750
141.3 PLFMNWNMB670

Hospitals & Medical

Hospitals & Medical frequencies for Bates County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bates County Memorial HospitalPatient Reports155.3400FMNKVD516

Nearest trunked radio sites

Distances are measured from the center of Spruce.

Dayton / Aaron · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 5 · Site 2 (hex 2) · NAC 1C8 · about 6 mi away
Control 154.905, 155.445
Voice 154.755, 156.2175, 169.675, 170.9125
Deepwater · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 5 · Site 3 (hex 3) · NAC 1CC · about 19 mi away
Control 154.6875, 169.775
Voice 159.21, 169.8875, 171.3875
MO Cass County Simulcast · Metropolitan Area Regional Radio System (MARRS)
RFSS 4 · Site 4 (hex 4) · NAC 2B4 · about 25 mi away
Control 851.1, 851.5625, 851.775, 852.7625
Voice 851.35, 852.925, 853.4125, 853.5875, 854.6375, 856.0125, 856.5125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does EMS or the ambulance service use in Spruce?

We do not have a EMS dispatch channel listed specifically for Spruce. The county-level EMS dispatch channels in the same county: Bates County Memorial Hospital 461.5625 MHz, narrow FM, 141.3 PL.

What scanner do I need to listen to fire and EMS in Spruce?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Spruce?

For Spruce, start with the Dayton / Aaron site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 154.905, 155.445 MHz. Program a control channel first; the scanner finds the voice channels from it.