About White Branch Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers White Branch: Lakeview Heights Fire 154.1450 MHz, narrow FM, 156.7 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN96), which needs a scanner that decodes that mode.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
Benton County channels that also cover White Branch
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Benton County Fire Expired: Expired 12/24 | Benton County Fire – Dispatch | 159.1500 | FMN | WQBT495 | |
| Deer Creek Township Fire | Deer Creek Township Fire – Dispatch /Operations * | 151.0025 In 159.0750 | RAN 5 | NXDN96 Encrypted | WQTM419 |
| Lakeview Heights Fire | Lakeview Heights Fire – Dispatch / Operations * | 154.1450 In 150.8050 | 156.7 PL | FMN | WPLS332 |
Nearest trunked radio sites
Distances are measured from the center of White Branch.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in White Branch?
We do not have a fire dispatch channel listed specifically for White Branch. The county-level fire dispatch channels in the same county: Lakeview Heights Fire 154.1450 MHz, narrow FM, 156.7 PL.
What scanner do I need to listen to fire and EMS in White Branch?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN96 is needed for the digital conventional channels.
What are the control channels for trunked radio in White Branch?
For White Branch, start with the Warsaw 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 773.03125, 773.28125 MHz. Program a control channel first; the scanner finds the voice channels from it.