About Liberty Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Liberty: Daviess County Fire 153.8450 MHz, narrow FM, 662 DPL.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
Data updated .
Daviess County channels that also cover Liberty
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Daviess County Fire | Daviess County Fire – Dispatch | 153.8450 In 158.9250 | 662 DPL | FMN | WPKV722 |
Nearest trunked radio sites
Distances are measured from the center of Liberty.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Liberty?
We do not have a fire dispatch channel listed specifically for Liberty. The county-level fire dispatch channels in the same county: Daviess County Fire 153.8450 MHz, narrow FM, 662 DPL.
What scanner do I need to listen to fire and EMS in Liberty?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Liberty?
For Liberty, start with the Winston site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 151.085, 169.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.