About Dallas Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Dallas: Cosby / Helena Fire 155.5575 MHz, narrow FM, 032 DPL. County-level ems dispatch that covers Dallas: DeKalb-Clinton Ambulance District 155.8200 MHz, narrow FM, 118.8 PL (expired).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
DeKalb County channels that also cover Dallas
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cosby / Helena Fire | Cosby / Helena Fire – Dispatch | 155.5575 In 158.9400 | 032 DPL | FMN | WRCZ943 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| DeKalb-Clinton Ambulance District Expired: Expired 12/23 | DeKalb-Clinton Ambulance District – Main (back-up for Clinton Co) | 155.8200 | 118.8 PL | FMN | WNSS739 |
Nearest trunked radio sites
Distances are measured from the center of Dallas.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Dallas?
We do not have a fire dispatch channel listed specifically for Dallas. The county-level fire dispatch channels in the same county: Cosby / Helena Fire 155.5575 MHz, narrow FM, 032 DPL.
What frequency does EMS or the ambulance service use in Dallas?
We do not have a EMS dispatch channel listed specifically for Dallas. The county-level EMS dispatch channels in the same county: DeKalb-Clinton Ambulance District 155.8200 MHz, narrow FM, 118.8 PL (expired).
What scanner do I need to listen to fire and EMS in Dallas?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Dallas?
For Dallas, start with the Winston site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 151.085, 169.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.