About Pontiac Fire and EMS Frequencies
Quick answer: Fire dispatch for Pontiac: Pontiac Fire 154.2350 MHz, NXDN48, RAN 13. County-level ems dispatch that covers Pontiac: Ozark County EMS 155.0700 MHz, narrow FM, 94.8 PL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
Data updated .
Pontiac conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pontiac Fire | Pontiac Fire – Dispatch | 154.2350 In 153.8300 | RAN 13 | NXDN48 | WNFU434 |
Ozark County channels that also cover Pontiac
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Brixey / Rockbridge Fire | Brixey / Rockbridge Fire – Paging /Dispatch/Operations (BRVRD) | 155.2650 In 153.8900 | 100.0 PL | FMN | WPWZ444 |
| Ozark County Fire | Ozark County Fire – Countywide (in use 10/24) | 155.7300 | CSQ | FMN | KDB407 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Brixey / Rockbridge Fire | Brixey / Rockbridge Fire – Tactical Channel (BRVRD) | 154.3550 | FMN | WPWZ444 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ozark County EMS | Lifecalll EMS – Dispatch | 155.0700 In 156.0000 | 94.8 PL | FMN | WPKC331 |
Nearest trunked radio sites
Distances are measured from the center of Pontiac.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Pontiac?
Fire dispatch channels listed for Pontiac: Pontiac Fire 154.2350 MHz, NXDN48, RAN 13.
What frequency does EMS or the ambulance service use in Pontiac?
We do not have a EMS dispatch channel listed specifically for Pontiac. The county-level EMS dispatch channels in the same county: Ozark County EMS 155.0700 MHz, narrow FM, 94.8 PL.
What scanner do I need to listen to fire and EMS in Pontiac?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Pontiac?
For Pontiac, start with the Theodosia site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 155.445, 161.8375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Pontiac fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Pontiac are marked encrypted.