Skip to content

Coal Fire and EMS Frequencies

We do not have frequencies listed specifically for Coal in Vernon County, Missouri yet. Countywide channels for Vernon County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Liberal 700 (Missouri Statewide Wireless Interoperable Network (MOSWIN)), about 17 miles away.

About Coal Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Coal: Vernon County Fire 151.3775 MHz, narrow FM, 82.5 PL. County-level ems dispatch that covers Coal: Vernon County Ambulance District (VCAD) 151.1150 MHz, DMR, CC 15 · TG 2 · SL 1 (backup). Trunked: Missouri Statewide Wireless Interoperable Network (MOSWIN), for example Vernon County Fire talkgroup 31206 (hex 79e6).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Missouri Statewide Wireless Interoperable Network (MOSWIN): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Coal, start with the Liberal 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN), about 17 miles away. Its control channels: 769.16875, 769.41875 MHz.

Data updated .

Vernon County channels that also cover Coal

Fire Dispatch

Fire Dispatch frequencies for Vernon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Vernon County FireVernon County Fire – Paging – Walker, Schell City (Backup to P25)151.3775
In 158.9625
82.5 PLFMNWQKH954
Vernon County FireVernon County Fire – Paging – Compton Junction, Milo (Backup to P25)155.310074.4 PLFMNKAI504
Vernon County FireVernon County Fire – Response – Rural/Countywide (Backup to P25)159.1050
In 154.8600
179.9 PLFMNWPNQ956
Vernon County FireVernon County Fire – Paging – Bronaugh, Deerfield, Sheldon159.1425
In 156.0675
179.9 PLFMNWQDV837

EMS Dispatch

EMS Dispatch frequencies for Vernon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Vernon County Ambulance District (VCAD) BackupVernon County Ambulance District (VCAD) – Dispatch (Bronaugh Simulcast)151.1150
In 156.1050
CC 15 · TG 2 · SL 1DMRKNCY923
Vernon County Ambulance District (VCAD) BackupVernon County Ambulance District (VCAD) – Dispatch (Nevada Simulcast)154.4075
In 158.8125
CC 5 · TG 2 · SL 1DMRKNCY923
Vernon County Ambulance District (VCAD) BackupVernon County Ambulance District (VCAD) – Dispatch (Walker Simulcast)154.4225
In 158.9475
CC 10 · TG 2 · SL 1DMRKNCY923

Hospitals & Medical

Hospitals & Medical frequencies for Vernon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Nevada Regional Medical CenterPatient Reports .155.3400CSQFMNWQI272

Missouri Statewide Wireless Interoperable Network (MOSWIN)

Missouri Statewide Wireless Interoperable Network (MOSWIN) talkgroups
AgencyDescriptionTalkgroupHexMode
Vernon County FireVernon County Fire – Dispatch (Countywide)3120679e6D
Vernon County FireVernon County Fire – Tactical Channel (Countywide)3120779e7D
Vernon County FireVernon County Fire – Tactical Channel (Countywide)3120879e8D
Vernon County FireVernon County Fire – Operations (Countywide)3120979e9D
Vernon County EMSVernon County EMS – Dispatch3121079eaD

Nearest trunked radio sites

Distances are measured from the center of Coal.

Liberal 700 · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 1 · Site 64 (hex 40) · NAC 1C4 · about 17 mi away
Control 769.16875, 769.41875
Voice 769.66875, 769.91875, 770.16875, 770.41875
Hume · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 5 · Site 9 (hex 9) · NAC 1C5 · about 18 mi away
Control 170.3875, 170.9125
Voice 154.0475, 154.1525, 154.3325
Nevada · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 1 · Site 9 (hex 9) · NAC 1C9 · about 19 mi away
Control 155.46, 161.9125
Voice 151.205, 155.325, 161.825
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Coal?

We do not have a fire dispatch channel listed specifically for Coal. The county-level fire dispatch channels in the same county: Vernon County Fire 151.3775 MHz, narrow FM, 82.5 PL.

What frequency does EMS or the ambulance service use in Coal?

We do not have a EMS dispatch channel listed specifically for Coal. The county-level EMS dispatch channels in the same county: Vernon County Ambulance District (VCAD) 151.1150 MHz, DMR, CC 15 · TG 2 · SL 1 (backup).

Do fire departments and EMS use a trunked radio system in Coal?

Yes. The county-level systems that cover Coal are Fire and EMS talkgroups are listed for Missouri Statewide Wireless Interoperable Network (MOSWIN): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Coal?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Coal?

For Coal, start with the Liberal 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 769.16875, 769.41875 MHz. Program a control channel first; the scanner finds the voice channels from it.