Skip to content

Blaine County Fire and EMS Frequencies

Blaine County in Montana has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 11 cities and communities below for local fire departments and EMS agencies.

About Blaine County Fire and EMS Frequencies

Quick answer: Fire dispatch for Blaine County: Blaine County Fire 155.1450 MHz, narrow FM, 114.8 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Blaine County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Blaine County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Blaine County FireBlaine County Fire – Dispatch (145)155.1450114.8 PLFMNWSL796
Blaine County FireBlaine County Fire – Dispatch (865)155.8650FMNWSL796

Radio system sites in Blaine County

Program the control channel first; your scanner finds the voice channels from it.

Chinook · Montana Public Safety Communications System
RFSS 1 · Site 49 (hex 31)
Control 149.225, 154.025
Voice 151.085
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Blaine County

Common questions

What frequency does the fire department use in Blaine County?

Fire dispatch channels listed for Blaine County: Blaine County Fire 155.1450 MHz, narrow FM, 114.8 PL.

What scanner do I need to listen to fire and EMS in Blaine County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Blaine County?

For Blaine County, start with the Chinook site of Montana Public Safety Communications System. Its control channels are 149.225, 154.025 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Blaine County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Blaine County are marked encrypted.