Skip to content

Ekalaka Fire and EMS Frequencies

We do not have frequencies listed specifically for Ekalaka in Carter County, Montana yet. Countywide channels for Carter County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Government Hill (Montana Public Safety Communications System), about 65 miles away.

About Ekalaka Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Ekalaka: Carter County Fire 155.0250 MHz, narrow FM, 156.7 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Carter County channels that also cover Ekalaka

Fire Dispatch

Fire Dispatch frequencies for Carter County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Carter County FireCarter County Fire – Dispatch (FMN)155.0250
In 158.8800
156.7 PLFMNWNND244
Carter County FireCarter County Fire – Dispatch (P25)155.0250
In 158.8800
P25WQFL731

Nearest trunked radio sites

Distances are measured from the center of Ekalaka.

Government Hill · Montana Public Safety Communications System
RFSS 2 · Site 4 (hex 4) · about 65 mi away
Control 161.875
Site 2-008 TBD · Montana Public Safety Communications System
RFSS 2 · Site 8 (hex 8) · about 77 mi away
Control 161.8125
Fallon · Montana Public Safety Communications System
RFSS 2 · Site 2 (hex 2) · about 77 mi away
Control 161.9625, 161.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Ekalaka?

We do not have a fire dispatch channel listed specifically for Ekalaka. The county-level fire dispatch channels in the same county: Carter County Fire 155.0250 MHz, narrow FM, 156.7 PL.

What scanner do I need to listen to fire and EMS in Ekalaka?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Ekalaka?

For Ekalaka, start with the Government Hill site of Montana Public Safety Communications System. Its control channels are 161.875 MHz. Program a control channel first; the scanner finds the voice channels from it.