Skip to content

Denton Fire and EMS Frequencies

We do not have frequencies listed specifically for Denton in Fergus County, Montana yet. Countywide channels for Fergus County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lewistown (Montana Public Safety Communications System), about 22 miles away.

About Denton Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Denton: Fergus County Fire 154.1600 MHz, narrow FM, no tone. Trunked: Montana Public Safety Communications System, for example Fergus County Fire talkgroup 4447 (hex 115f).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Montana Public Safety Communications System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Denton, start with the Lewistown site of Montana Public Safety Communications System, about 22 miles away. Its control channels: 155.07, 155.85 MHz.

Data updated .

Fergus County channels that also cover Denton

Fire Dispatch

Fire Dispatch frequencies for Fergus County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fergus County FireLewistown Rurual Fire (160)154.1600FMNWNXN634
Fergus County FireLewistown Rurual Fire (445)154.4450FMNWNXN634

Montana Public Safety Communications System

Montana Public Safety Communications System talkgroups
AgencyDescriptionTalkgroupHexMode
Fergus County FireRural Fire4447115fD

Nearest trunked radio sites

Distances are measured from the center of Denton.

Lewistown · Montana Public Safety Communications System
RFSS 1 · Site 41 (hex 29) · NAC 160 · about 22 mi away
Control 155.07, 155.85
Voice 154.74, 155.595
Lewistown 800 · Montana Public Safety Communications System
RFSS 1 · Site 57 (hex 39) · NAC 160 · about 30 mi away
Control 851.6, 852.775
Voice 851.075, 851.325
Highwood Baldy · Montana Public Safety Communications System
RFSS 1 · Site 28 (hex 1C) · NAC 165 · about 33 mi away
Control 154.725, 154.98
Voice 155.43, 155.685, 161.9125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Denton?

We do not have a fire dispatch channel listed specifically for Denton. The county-level fire dispatch channels in the same county: Fergus County Fire 154.1600 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Denton?

Yes. The county-level systems that cover Denton are Fire and EMS talkgroups are listed for Montana Public Safety Communications System: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Denton?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Denton?

For Denton, start with the Lewistown site of Montana Public Safety Communications System. Its control channels are 155.07, 155.85 MHz. Program a control channel first; the scanner finds the voice channels from it.