About Lewistown Fire and EMS Frequencies
Quick answer: Fire dispatch for Lewistown: Lewistown Fire 154.1750 MHz, narrow FM, no tone. Trunked: Montana Public Safety Communications System, for example Lewistown Fire talkgroup 4497 (hex 1191).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Montana Public Safety Communications System: 2 talkgroups; Montana Public Safety Communications System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Lewistown, start with the Lewistown 800 site of Montana Public Safety Communications System, about 2 miles away. Its control channels: 851.6, 852.775 MHz.
Data updated .
Lewistown conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lewistown Fire | Lewistown Fire – Dispatch (175) | 154.1750 | FMN | KEL449 | |
| Lewistown Fire | Lewistown Fire – Dispatch (235) | 154.2350 | FMN | KEL449 |
Lewistown trunked talkgroups
Montana Public Safety Communications System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Lewistown Fire | Lewistown Fire – Dispatch | 4497 | 1191 | D |
| Lewistown EMS | Lewistown EMS – Dispatch | 4517 | 11a5 | D |
Fergus County channels that also cover Lewistown
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fergus County Fire | Lewistown Rurual Fire (160) | 154.1600 | FMN | WNXN634 | |
| Fergus County Fire | Lewistown Rurual Fire (445) | 154.4450 | FMN | WNXN634 |
Montana Public Safety Communications System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Fergus County Fire | Rural Fire | 4447 | 115f | D |
Nearest trunked radio sites
Distances are measured from the center of Lewistown.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Lewistown?
Fire dispatch channels listed for Lewistown: Lewistown Fire 154.1750 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Lewistown?
Yes. Fire and EMS talkgroups are listed for Montana Public Safety Communications System: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Lewistown?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Lewistown?
For Lewistown, start with the Lewistown 800 site of Montana Public Safety Communications System. Its control channels are 851.6, 852.775 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Lewistown fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Lewistown are marked encrypted.
Are Lewistown fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Lewistown are marked encrypted.