Skip to content

Broadus Fire and EMS Frequencies

Broadus in Powder River County, Montana has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Government Hill (Montana Public Safety Communications System), about 68 miles away.

About Broadus Fire and EMS Frequencies

Quick answer: Fire dispatch for Broadus: Broadus Fire 154.3550 MHz, narrow FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Broadus conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Broadus
AgencyDescriptionFrequency (MHz)ToneModeFCC
Broadus FireBroadus Fire – Dispatch154.3550
In 159.2700
FMNWPXN510

Nearest trunked radio sites

Distances are measured from the center of Broadus.

Government Hill · Montana Public Safety Communications System
RFSS 2 · Site 4 (hex 4) · about 68 mi away
Control 161.875
Little Wolf Mountain 800 · Montana Public Safety Communications System
RFSS 2 · Site 19 (hex 13) · NAC 160 · about 77 mi away
Control 851.1875, 852.0375
Voice 853.1625, 853.6875
Site 2-008 TBD · Montana Public Safety Communications System
RFSS 2 · Site 8 (hex 8) · about 97 mi away
Control 161.8125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Broadus?

Fire dispatch channels listed for Broadus: Broadus Fire 154.3550 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Broadus?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Broadus?

For Broadus, start with the Government Hill site of Montana Public Safety Communications System. Its control channels are 161.875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Broadus fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Broadus are marked encrypted.