Skip to content

Goldcreek Fire and EMS Frequencies

We do not have frequencies listed specifically for Goldcreek in Powell County, Montana yet. Countywide channels for Powell County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Cominco Mountain (Montana Public Safety Communications System), about 7 miles away.

About Goldcreek Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Goldcreek: Ovando Rural Fire Protection District 154.2500 MHz, narrow FM, no tone. County-level ems dispatch that covers Goldcreek: Powell County EMS 155.2200 MHz, narrow FM, no tone.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Powell County channels that also cover Goldcreek

Fire Dispatch

Fire Dispatch frequencies for Powell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ovando Rural Fire Protection DistrictOvando Rural Fire Protection District – Dispatch154.2500FMNWNVR405

EMS Dispatch

EMS Dispatch frequencies for Powell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Powell County EMSPowell County EMS – Dispatch155.2200FMNKNGL593

EMS Tactical

EMS Tactical frequencies for Powell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Powell County EMSPowell County EMS – Tactical Channel155.2800FMNKNGL593
Powell County EMSPowell County EMS – Tactical Channel155.3850FMNKNGL593

Nearest trunked radio sites

Distances are measured from the center of Goldcreek.

Cominco Mountain · Montana Public Safety Communications System
RFSS 1 · Site 10 (hex A) · about 7 mi away
Control 153.845, 154.95
Voice 155.025, 155.25
State Prison 800 · Montana Public Safety Communications System
RFSS 1 · Site 54 (hex 36) · NAC 164 · about 15 mi away
Control 851.0375, 851.1375, 851.375
Voice 853.15, 853.675
MacDonald Pass · Montana Public Safety Communications System
RFSS 1 · Site 7 (hex 7) · NAC 16C · about 30 mi away
Control 154.34, 161.975
Voice 154.1, 154.4, 159
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Goldcreek?

We do not have a fire dispatch channel listed specifically for Goldcreek. The county-level fire dispatch channels in the same county: Ovando Rural Fire Protection District 154.2500 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Goldcreek?

We do not have a EMS dispatch channel listed specifically for Goldcreek. The county-level EMS dispatch channels in the same county: Powell County EMS 155.2200 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Goldcreek?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Goldcreek?

For Goldcreek, start with the Cominco Mountain site of Montana Public Safety Communications System. Its control channels are 153.845, 154.95 MHz. Program a control channel first; the scanner finds the voice channels from it.